Check in the cleaning section, for previous actions in the following restoration processes.
-
Ref. 07031 Rough acrylic coating. With microlaminar extenders, which give it a high resistance to aging compared with other acrylics on the market. Aesthetic finish on exteriors and facades. Great filling power and homogenization of very irregular surfaces. Thicknesses of 1 - 1.5 mm are achieved. Vertical raincoat with good breathability. Different smooth finishes, rough, chopped, monolayer ... Resistant to mold. The good drying behavior allows an easy application. Work on consolidated and stable surfaces. White and colors VOC 4g / l - 2010 140g / l.
-
Ref. 07032 Acrylic coating. Smooth and stony finish. Ideal in public works with concrete formwork, on highways, ports, retaining walls, ships ... Vertical raincoat with good breathability. To fill the irregularities and coke of the supports. Resistant to mold. White and colors. VOC 5g / l - 2010 140g / l.
-
Ref. 04022 Painting / coating based on acrylic copolymers with a very matt finish. Especially suitable for interior and exterior quality work, with high performance and minimal maintenance. Very hard and easy to clean. Ideal in the rehabilitation of facades. Vertical waterproofing and protector of rain and humidity. Good breathability Long durability Protection of concrete, improves resistance to carbonation. Resistant to mold. High performance and high covering power. Elegant and sober finish. It does not splash. White, black and colors. VOC 22g / l - 2010 40g / l Certification UNE 48244: 2007. Aqueous emulsion coating for exteriors, in water and water vapor permeability, adhesion, accelerated aging, hiding power, fineness, alkali resistance, mold and algae.
-
Ref. 10031 Reactive polyvalent resin in high concentration aqueous solution. Hydraulic mortar improver, acts as an elasticizer, avoiding its tendency to crack and the formation of fissures. Plasticizes the mortars, avoiding retractions, improving fluidization in them and providing them with greater resistance to compression and abrasion. Bridge of union between old and new mortars, stuccos or mortars, improving their adherence. Sprinkle with cement between coats ... Dilution 1/3 water. VOC 1g / l - 2010 30g / l.
DATA SHEET / SAFETY DATA SHEET -
Ref. 04023
Satin plastic paint based on acrylic copolymers. Very noble to look with highly silky finish For interior and exterior decorations. Washable, resistant to wet rubbing, exceeding 8,000 double passes. Softness of an enamel, health benefits. Excellent for applications in medical centers, pharmacists, hospitals, schools ..., where low toxicity is required. Minimum maintenance Exteriors and facades in aggressive, industrial, marine, contaminated or humid environments. Anti-carbonation protection of concrete. Raincoat. Additivated with ADITOR PU (08 Complementos) is resistant to standing water. Resistant to mold. Easy application, high performance. Flexible. Excellent cover. White and colors. VOC 20g / l - 2010 100g / l
Anticarbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation) / CERTIFICATION (CE Marking)
-
Ref. 04024 Paint / coating similar to the ARTICRIL MILENNIUM, but with siloxane binders that give it a water-resistant and non-stick nature, keeping the supports dry and clean. Very matt finish. Especially indicated in the rehabilitation of facades in urban climates for its resistance to dirt. Very hard and easy to clean. Vertical waterproofing and protector of rain and humidity. Good breathability Long durability Protection of concrete, improves resistance to carbonation. Resistance to mold. High performance and high covering power. White and colors. VOC 22g / l - 2010 40g / l. UNE 48244 certification: 2007.
-
Ref. 02161
Two component bright aliphatic polyurethane. Direct anchoring on surfaces without pores, metals (aluminum, galvanized, stainless steel, copper, ...), plastics (PVC, methacrylate, polycarbonate ...), ceramics, etc. Great iron protector prepared with anticorrosive primers like ARTIDUR GALVÁNICO or NEW TEC ARTIPOX 2C. Very flexible, it resists blows. Slow aging and long duration. Industrial protection and marine and extreme environments, with excellent behavior against sunrays, acid rain and extreme temperatures. Ideal on machinery, facades of sheet metal, furniture ... Very resistant to mechanical abrasion, interior and exterior pavements of moderate traffic. Good resistance to chemical aggressions and standing water. Highly decorative finish, lacquered application with short hair roller and airless. White, black and permanent colors. VOC 380g / l - 2,010 500g / l.
UNE 48274: 2003 Certification in Gloss, Abrasion resistance (Taber), flexibility, hardness (Persoz), traction adhesion, stagnant water resistance, alkalis and acids, UV slits, and protection against slippage according to UNE-ENV 12633: 2003
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (B) / CERTIFICATIONS
-
Ref. 06164 Polyurethane fixative for disintegrated supports. Great hardness and tenacity. Recommended for dry, wet or dusty concretes. Consolidates and protects concrete pavements. Sealing layer in porous floors before applying the ARTIDUR-X 100 or ARTIDUR A2C finishing polyurethanes. Outdoors or exposure to sunlight do not use as a visible layer, yellow. It can be seen in places protected from sunlight, increasing the tone of the concrete. Apply in well-ventilated places. Restoration of exterior wood very aged, saturate before painting. VOC 550g / l - 2010 750g / l.
-
Ref. 07033
Waterproof coating with textured elastic acrylic binder. Multifunctional Anticarbonatation. Breathable Absorbs cracks up to 2 mm. It can be assembled with reticulated mesh. Great filling power and homogenization of very irregular surfaces. Thicknesses of 1 - 1.5 mm are achieved. Different rough finishes, chopped, gotelé, ... Composed with hollow mineral particles, with air at very low pressure, has a very low thermal and acoustic transmission power and a great power of isolation. It keeps the supports hot and dry giving comfort in the interiors. Is light. Convenient application. White and colors. VOC 4g / l - 2010 40g / l.
Anti-carbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation) / CERTIFICATION (CE Marking)
-
Ref. 07321 Transparent and waterproof elastomeric coating. Indicated for the repair, protection and waterproofing of facades and roofs with glazed finishes, tiles and tiles, as well as stones and slate, where a transparent finish is necessary. Sealing of sanitary ceramics eliminating joints and protecting from detachment. On ceramic supports, clean and tone with STONEART. It can be reinforced by arming with the fiberglass ARTIMAT FIX mesh that is completely absorbed, transparent and that unifies splices and overlaps. To prevent adhesion of the external dirt, varnish with BARTICRIL PUR. It can also be repainted with a variety of opaque finishes. It is also an excellent consolidant and protector of concrete. 03063. VOC 7g / l - 2010 140g / l.
-
Ref. 07034
Smooth elastic waterproof coating. With acrylic binder It contains hollow mineral particles and natural fibers, which reinforce its lightness. Waterproofing, decoration and insulation of facades and interiors. Its layer thickness and its elasticity allow to absorb microcracks up to 1 mm. It can be assembled with reticulated mesh. Uniformity of finishing, corrects deficiencies of the support. Anticarbonatation. Breathable No possibility of cracking when aging. High resistance to alkalinity, sunlight, high condensation and extreme climates. Mate. White and colors. VOC 3g / l - 2010 140g / l.
Anti-carbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation) / CERTIFICATION (CE Marking) -
Ref. 10592 Continuous powder coating on the basis of high performance hydraulic micro cement. Based on calcium cements and marble powder of different granulometries, it is presented in two modes FINE and THICK. It is used for the realization of highly decorative continuous coatings, both vertical and horizontal. Direct adherence on any type of material. Very hard and tenacious. Apply ARTIPUR SELLADOR as a primer and between layers, it will provide a better homogenization of the absorptions, and in supports with different materials (tiling, ceramics ...) a better regularization. It is advisable to seal with NEW TEC BARNIZ varnish or on floors or in continuous immersion BARTIDUR A-2C. Low thermal diffusion Antistatic Kitchens, toilets, workshops, restaurants, hotels, shops ... interior and exterior decorations. White color. Easily colorable.
-
Ref. 10594 Cellular restoration mortar. Recovery and creation of volumes. Very light. Composed in its interior with hollow natural mineral particles, which crystallize in their interior the salts and caleos of the supports, gaining hardness with the years. No cracking or shrinkage at temperatures from -15oC to + 80oC. Extraordinary resistance to slow compression of buildings. Ideal for rehabilitation work and creation of new environments and interior and exterior decorations. Its touch and finish are natural. Its drying is very controlled, allowing a huge variety of work techniques. Repair and creation of stones and stuccos, chairs, graffiti, exposed work, ... It is sculptable and moldable. You can work in molds. Product of unbeatable specific qualities, is present in many renovations and restorations of facades and monuments around the world. Fronts of balconies, edges, moldings, screeds ... It weighs less and works better than other recommended mortars. Used in archeology to redo volumes in findings of stones, ceramics ... in pitchers, walls, houses ... Desalination of ancient walls in monumental restoration. It can be used in thinner and diluted layers, even by brush, roller or platen. It admits aggregates to equalize textures. It is advisable to waterproof with HIDROFUART BIO or NEW TEC HIDROFUART W, or protect with ARTISIL mineral coating, or with other breathable paints. Color Gray, is also available in White ARTIMIX 4-BL 10595. Dilution approx 15 Kg + 8 liters (1 part ARTICRIL RESIN 6 + 3 parts of water). It is advisable to prime the support and between layers with the same mixture. It can be diluted with BASE ARTIMIX 4 to color. Check colors Upon request, production of dry-colored mortar, in the factory.
-
Ref. 10596 Mixed air lime mortar with special aggregates and modifying additives. To cover new facades or for the rehabilitation of old ones. Textured finish. Concrete repair High resistance and stability to acid rain and pollution in urban environments and the demands of extreme climates. Repair of structures and load walls in poor condition when thickness and strength are required. No retractions. Thick layer: 20 mm. You can get a wide variety of classic stucco finishes, present in our facades and with easy application. Working layers of different colors and with traditional tools you get beautiful sgraffito. It can be finished with a wide variety of coatings, consolidants and / or water repellents. Dilution approx 25 Kg + 7 liters (1 part ARTICRIL RESIN 6 + 3/4 parts of water). It is advisable to prime the support and between layers with the same mixture. White color. It can be diluted with ARTIMIX 5 BASE to color, see colors. On request, production of dry-colored mortar in the factory.
-
Ref. 15592 Flexible waterproofing mortar, for the coating of insulating plates. Without retraction. It can be armed with ARTIMIX 9 MESH to improve the mechanical resistance, the possible dilatations or the blows. It does not need water. It comes in two components powder and resin. Uniform finish and excellent leveling. Reduce the consumption of the coating or finishing paint. Its planimetry and softness of application allow finishes with finer and more aesthetic coatings than other mortars on the market.
-
Ref. 15591 Permanent adhesive mortar for all kinds of construction materials. Highly adhesive leveling paste for fixing and gluing the insulating plates in the Artictherm process. It comes in two components powder and resin. Once the mixture is made, it becomes a smooth paste that is easy to apply without detaching or retracting. Matt Gray finish.
-
Ref. 08063 Capa segelladora sobre superfícies poroses, absorbents o irregulars. S’aplica com a preparació del PROCÉS ARTIPUR, tant en acabats en color com transparent. Evita micro fissures o petits esquarteraments homogeneïtzant l’absorció entre les juntes en els enrajolats, facilitant la formació de la pel·lícula elàstica amb els elastòmers ARTIPUR. En qualsevol suport i circumstància, per assegurar un bon ancoratge, es recomanable afegir un 1% d’ADITOR PU promotor d’adherència . COV 28g/l - 2010 30g/l
FITXA TÈCNICA / FULLA SEGURETAT -
Ref. 08063 Sealing layer on porous, absorbent or irregular surfaces. It is applied as preparation of the ARTIPUR PROCESS, both in color and transparent finishes. Avoid micro-cracks or small squabbles. it homogenises the absorption between the joints in the tiles and facilitates the formation of the elastic film with the ARTIPUR elastomers. In any support and circumstance, to ensure a good anchoring, it is advisable to add a 1% Aditor PU adhesion promoter. VOC 28g / l - 2010 30g / l
-
Ref. 07052 Mineral paint with natural silicates. Remineralizer of the stone. Chemical reaction with integration in the support. It does not film. Microporous finish is highly breathable to water vapor. Mold resistant in a natural way Ecological. Maximum duration, it does not crack, crack or decompose in its aging. On all types of mineral construction materials. Protection of natural and artificial stone, mortar or cement or lime plaster, exposed brick, concrete, old lime paints or old silicates. Respect the original textures. It has a natural appearance to the touch and sight. Highly recommended in rehabilitation and restoration of buildings and ancient and historic monuments. Dilute with ARTISIL IMPREGNATION to make glazes and regulate the viscosity and also recommended for priming. White and colors on request produced in the factory with inorganic pigments. VOC 15g / l - 2010 140g / l. In accordance with DIN 18636.
DATA SHEET /https://www.articsa.net/wp-content/uploads/2020/07/MSDS-ARTISIL-Eng.pdf CERTIFICATIONS
-
Ref. 07053 Consolidating fixative based on natural mineral silicates. Remineralizer of the stone. Extreme breathability Excellent for mixing with inorganic pigments and creating glazes and patinas. Do not use as a finishing coat for possible whitening problems, except when used as a pigmented glaze. Regulates the absorption of the subsequent finishes. Diluent of the ARTISIL mineral paint, to achieve the desired degree of opacity and to regulate the viscosity to adjust to the needs of the supports, which must always be minerals, stone, stucco, concrete ... VOC 5,5g / l - 2010 30g / l.
-
Ref. 03063 Water-based polyurethane varnish for concrete, printed concrete, stone and wood. Sparkly. Flexible. Resistance to sunlight. Renovation of veneers, slate, natural and artificial stone, masonry .... Protection of dirt on elastomers such as ARTIGUM GEL FIX, does not present sticky touch or at high temperatures. On plastic paints to reinforce alkali resistance, moderate abrasion and pedestrian traffic. Highlight the appearance of the surfaces. Easy horizontal and vertical application. VOC 24g / l - 2010 130 g / l. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 13035 Two-component glossy aliphatic polyurethane varnish. Exterior Interior. Excellent tenacity High chemical resistance, mechanical resistance and sunlight. Special for concrete floors, protection of absorbent marble, polyester resins (boats), wood in extreme environments. To protect ARTIMIX-20 MICROCEMENTO in workplaces and pavements. When high mechanical and chemical resistance is required. Available in satin and matt finish. On porous supports seal with a first coat of gloss. VOC 398g / l - 2,010 400 g / l. UNE-ENV 12633: 2003 Slip resistance. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 10094 Liquid mixing and kneading. To color the MIX 4 evenly. It avoids color differences in the dyeing and during setting. Reproducible colors With pigments resistant to alkalinity. Tinting of monolayers. Check colors VOC 1g / l - 2010 30g / l.
-
Ref. 10095 Liquid mixing and kneading. To color the MIX 5 homogeneously. It avoids color differences in the dyeing and during setting. Reproducible colors With pigments resistant to alkalinity. Tinting of monolayers. Check colors VOC 1g / l - 2010 30g / l.
-
Ref. 06134 Hydrophobic consolidating impregnation for porous materials. Creates surface film integrated in the support. With high penetration, it seals the pores, hardening the dusty supports, brick, face, concrete, mortars, old lime stuccos ... Suitable for limestones, sandstones and granites. When necessary a waterproof finish is not invisible. Transparent finish with slight tone, which increases as successive layers are applied. Accepts pigmentation to make glazes. Waterproof and with superficial perspiration. 741 g / L - 2010 750 g / L Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 06181 Consolidating and hydrophobic cortical impregnation in solvent base. To stop finishing, but can be repainted with solvent paints. For stones, concrete and stuccos. Great penetrating power. High values of resistance to diffusion for a better protection against carbonation and a lower resistance to diffusion of water vapor, breathable. Saturate until homogenization of the support. Apply from the bottom up. Wet layer on wet. Colorless, slightly increases the tone of the support, without filmifying. VOC 742g / l - 2,010 750g / l.
-
Ref. 06182 Consolidating in depth prior to restoration. Based on water-based colloidal silica dispersion. High penetration and non-water repellent. Fixing of supports before their screed with mortars or stuccos. Do not use as a final layer, it could react whitening. To consolidate natural stones of all kinds, acidic or basic. Neutralizes the acidity caused by carbonation. Consolidates the aged concrete and recovers the original consistency. It does not need as long to cure as Silicato de Etilo. Apply from the bottom up. VOC 1g / l - 2010 30g / l.
-
Ref. 01031 Acrylic fixative of great penetration. Hard and resistant. Seals old plastic paint, lime, tempera and degraded monolayers with microcracks. Slight increase in support tone Increase the performance of the finishes with plastic paints. Uniform absorptions and avoid color differences in the finishing layers. It comes in a very pure state. Dilution 1 p + 3-4 p. water by weight (according to absorption). Avoid the use application to avoid excess film. VOC 2g / l - 2010 30g / l.
-
Ref. 06141 Water repellent based on modified polysiloxanes. Long duration, over 10 years. Invisible, it does not modify the background tone. For exposed work, bricks, stone, stuccos ... in any climate. Also for textiles, wood and non-cracked porous materials. Microporous, does not form superficial film. Great water-repellent capacity and high perspiration. Resistant to mold. It prevents the formation of salts and does not green with time. Self-cleaning, keeps the surface clean, hindering the adherence of dust and dirt. Do not dilute, apply to saturation in two layers from bottom to top crossed wet on wet. The immersion treatment is also possible. VOC 748g / l - 2,010 750g / l.
-
Ref. Sanitizing matte plastic paint for exterior and interior use. Thanks to the new silver ion technology, it is resistant to bacteria and fungi, protecting and cleaning the applied surfaces. Almost odorless and with highly decorative features, such as resistance to wet rubbing, covering and performance. Excellent results. Suitable for any construction support but thanks to its sanitizing nature, it is especially suitable for hospitals, residences, schools, hotels and homes in general. VOC <1 g / L - 2010 30 g / L.
SECURITY SHEET -
Ref. 13035 Water-based one-component varnish for the protection of floors and decoration of the ARTIMIX 20 micro cement or similar porous supports (stone, mortar, printed concrete, brick, wood ...). Indoor and outdoor use. Shiny finish. Excellent wetting and consolidation of the support, blocking possible efflorescence. It can be applied as the first coat of the BARTIDUR A2C to minimize the usual increase of tone of the varnishes to the solvent. Easy horizontal and vertical application. Resistance to moderate abrasion and pedestrian traffic. COV 50- 2010 140g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET -
Ref. 13031 Deep penetration fixator. Nanoparticles that act from the bottom of the porous materials until their surface consolidating action. Very breathable Substitutes acrylic copolymers in solvent. Dilution according to the state of disintegration of the support 1 p + 2-3 p water. Surfaces of aged paintings, plaster, cement, lime, brick, stone ... VOC 11g / l - 2010 30g / l
-
Ref. 06042 Siloxane water repellent with water-based nanoparticles for mineral supports. Excellent penetration Invisible. It does not film and does not modify the appearance of the support. Microporous, waterproof and transpires water vapor. Self-cleaning, keeps the surface clean and free of dust and dirt. Avoid the formation of salts. Resistant to mold. Ideal for facades of exposed work stuccos, fiber cement, natural stone, etc. In the application on paints and coatings to water or solvent, reinforces the hydrophobic performance. VOC 1- 2010 30g / l.
-
Ref. 06048 Water repellent and sealant for porous and absorbent surfaces. Excellent penetration Glossy finish. Compatible with alkaline and cementitious supports. Interior and exterior. It does not yellow. Avoid the adherence of dust and dirt. It is micro porous and allows the support to breathe. It prevents the formation of salts and the growth of fungi. Long-term treatment 3 g / l - 2010 30 g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 06046 Water-repellent and water-repellent, based on fluorinated acrylic resins. It does not form a film. Destined to the protection of porous materials against the penetration of oils, fats, lubricants ... on surfaces such as tiles, reconstructed stones, marble, concrete, cement, natural stones, etc. Pearl effect. Without smell. It does not increase the tone of the support, it is invisible. VOC 10 g / L - 2.010 30g / L.
