973 450 717|info@articsa.net

  • Placeholder

    SILART

    Ref. 04041 Matte siliconized plastic paint. Multipurpose. Its minimal shrinkage during drying makes it ideal for working on difficult surfaces, alkaline supports, lime, cement, old paint, temper ... without tearing them off. Compatible with plaster casts and plasterboard. On highly degraded surfaces, prime with NEW TEC FIXO or FIXOART. It can be used as first coat of thicker coatings. Vertical waterproofing and good breathability. For interior decorations and for the rehabilitation of facades and light patios. Washable, resistant to wet rub. No splashes, easy application, very good coverage and high performance. White and colors. Also available in SILART EXTRA BLANCO 04042. VOC 22g / l - 2010 40g / l UNE 48243 Certification: 2007. Plastic paint in aqueous dispersion, matt, in preservation and stability in the container, specular brightness, alkali and wet rub resistance, recoatability, hiding power. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET / CERTIFICATIONS

    Details
  • Placeholder

    VINILAR MATE SEDOSO

    Ref. 04012 Vinyl copolymers. Highly decorative finish, matte front and silky against light and touch. With pigments of granulometry selected to improve opacity and whiteness. Recommended for high decoration, hotels and high standing jobs. Soft application High performance, excellent coverage, easily washable and low maintenance. Lacquered with airless gun. White, colors on request. VOC 12g / l - 2010 30g / l. ARTIC pinturas

    DATA SHEET (no available) / SAFETY DATA SHEET

    Details
  • Placeholder

    VINYLMAT

    Ref. 04013 Vinyl copolymers with a matt finish and silky to the touch. With pigments of granulometry selected to improve opacity and whiteness. Without rebros, it is perfect for reworking and for works against light. The slow initial drying and the great leveling favor the work in the interior decorations even with intense colors. It does not splash or drip. Soft application Very hard and easy to clean. Ideal also for plasterboard, plasters projected. White and colors. VOC 5g / l 2010 30g / l. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET

    Details
  • Placeholder

    ECOARTIC

    Ref. 05033 Matte ecological plastic paint, without residual monomers and totally biodegradable. Completely non-toxic and without any odor during application. Interiors with demands of respect for the environment. Excellent cover, no splashes, very well wet plasterboard and plaster casts. It meets the requirements of the market standard regulations for ecological plastic paints. White and soft colors. VOC 3g / l - 2010 30g / l. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET

    Details
  • Placeholder

    ARTISIL

    Ref. 07052 Mineral paint with natural silicates. Remineralizer of the stone. Chemical reaction with integration in the support. It does not film. Microporous finish is highly breathable to water vapor. Mold resistant in a natural way Ecological. Maximum duration, it does not crack, crack or decompose in its aging. On all types of mineral construction materials. Protection of natural and artificial stone, mortar or cement or lime plaster, exposed brick, concrete, old lime paints or old silicates. Respect the original textures. It has a natural appearance to the touch and sight. Highly recommended in rehabilitation and restoration of buildings and ancient and historic monuments. Dilute with ARTISIL IMPREGNATION to make glazes and regulate the viscosity and also recommended for priming. White and colors on request produced in the factory with inorganic pigments. VOC 15g / l - 2010 140g / l. In accordance with DIN 18636. ARTIC pinturas

    DATA SHEET /https://www.articsa.net/wp-content/uploads/2020/07/MSDS-ARTISIL-Eng.pdf CERTIFICATIONS

    Details
  • Placeholder

    PLIOART IMPREGNACIÓN

    Ref. 06131 High penetration consolidating impregnation for all types of construction materials. Absorption sealer on dusty backgrounds. Homogenizer product of the supports, avoids differences of joints and color of the finishes. Excellent fixer of deteriorated monolayers, broken cement, cement or lime mortar or stucco, exposed brick, concrete. It can soften old acrylic paints badly adhered and fix those that are in good condition. Breathable Treat the bottom without saturating. It slightly increases the tone of the support. Ideal to finish with PLIOART, with which you can mix to create glazes or intermediate layers. VOC 742g / l - 2,010 750g / l. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET

    Details
  • Placeholder

    FIXOART

    Ref. 01031 Acrylic fixative of great penetration. Hard and resistant. Seals old plastic paint, lime, tempera and degraded monolayers with microcracks. Slight increase in support tone Increase the performance of the finishes with plastic paints. Uniform absorptions and avoid color differences in the finishing layers. It comes in a very pure state. Dilution 1 p + 3-4 p. water by weight (according to absorption). Avoid the use application to avoid excess film. VOC 2g / l - 2010 30g / l. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET

    Details
  • Placeholder

    NEW TEC FIXO

    Ref. 13031 Deep penetration fixator. Nanoparticles that act from the bottom of the porous materials until their surface consolidating action. Very breathable Substitutes acrylic copolymers in solvent. Dilution according to the state of disintegration of the support 1 p + 2-3 p water. Surfaces of aged paintings, plaster, cement, lime, brick, stone ... VOC 11g / l - 2010 30g / l ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET

    Details
  • Placeholder

    ARTIPUR SELLADOR

    Ref. 08063 Capa segelladora sobre superfícies poroses, absorbents o irregulars. S’aplica com a preparació del PROCÉS ARTIPUR, tant en acabats en color com transparent. Evita micro fissures o petits esquarteraments homogeneïtzant l’absorció entre les juntes en els enrajolats, facilitant la formació de la pel·lícula elàstica amb els elastòmers ARTIPUR. En qualsevol suport i circumstància, per assegurar un bon ancoratge, es recomanable afegir un 1% d’ADITOR PU promotor d’adherència . COV 28g/l - 2010 30g/l ARTIC pinturas FITXA TÈCNICA / FULLA SEGURETAT
    Details
  • Placeholder

    ARTIPUR SELLADOR

    Ref. 08063 Sealing layer on porous, absorbent or irregular surfaces. It is applied as preparation of the ARTIPUR PROCESS, both in color and transparent finishes. Avoid micro-cracks or small squabbles. it homogenises the absorption between the joints in the tiles and facilitates the formation of the elastic film with the ARTIPUR elastomers. In any support and circumstance, to ensure a good anchoring, it is advisable to add a 1% Aditor PU adhesion promoter. VOC 28g / l - 2010 30g / l ARTIC pinturas

    DATA SHEET SECURITY SHEET

    Details
  • Placeholder

    ARTIDUR IMPREGNACIÓN X-40

    Ref. 06164 Polyurethane fixative for disintegrated supports. Great hardness and tenacity. Recommended for dry, wet or dusty concretes. Consolidates and protects concrete pavements. Sealing layer in porous floors before applying the ARTIDUR-X 100 or ARTIDUR A2C finishing polyurethanes. Outdoors or exposure to sunlight do not use as a visible layer, yellow. It can be seen in places protected from sunlight, increasing the tone of the concrete. Apply in well-ventilated places. Restoration of exterior wood very aged, saturate before painting. VOC 550g / l - 2010 750g / l. ARTIC pinturas

    TECHNICAL DATA SHEET/ SAFETY DATA SHEET

    Details
  • Placeholder

    NEW TEC BARNIZ MICROCEMENTO

    Ref. 13035 Water-based one-component varnish for the protection of floors and decoration of the ARTIMIX 20 micro cement or similar porous supports (stone, mortar, printed concrete, brick, wood ...). Indoor and outdoor use. Shiny finish. Excellent wetting and consolidation of the support, blocking possible efflorescence. It can be applied as the first coat of the BARTIDUR A2C to minimize the usual increase of tone of the varnishes to the solvent. Easy horizontal and vertical application. Resistance to moderate abrasion and pedestrian traffic. COV 50- 2010 140g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect. DATA SHEET / SAFETY DATA SHEET
    Details

Title

We are pleased to inform you that Artic has new certifications:

SUBSCRIBE AND RECEIVE ALL THE NEWS

YOU CAN FIND US

Go to Top