-
Ref. 16031 Masilla de renovació polivalent en pols, d'interior, per a aplicació manual. Permet reomplir, renovar i allisar. FITXA TÈCNICA -
Ref.04016 Vinyl plastic paint. Especially suitable for interior decoration. Great softness to the touch, excellent leveling power (no cuts are noticeable), resistance to wet rubbing (easy cleaning) and brightness of its white and soft colors. Matte and smooth finish, no splashes. Good results at a very competitive price. Available in the same white and pastel base format. Easily repaintable with minimal VOC content.
SECURITY SHEET / TECHNICAL SHEET -
Ref. Sanitizing matte plastic paint for exterior and interior use. Thanks to the new silver ion technology, it is resistant to bacteria and fungi, protecting and cleaning the applied surfaces. Almost odorless and with highly decorative features, such as resistance to wet rubbing, covering and performance. Excellent results. Suitable for any construction support but thanks to its sanitizing nature, it is especially suitable for hospitals, residences, schools, hotels and homes in general. VOC <1 g / L - 2010 30 g / L.
SECURITY SHEET -
Ref. 03063 Water-based polyurethane varnish for concrete, printed concrete, stone and wood. Sparkly. Flexible. Resistance to sunlight. Renovation of veneers, slate, natural and artificial stone, masonry .... Protection of dirt on elastomers such as ARTIGUM GEL FIX, does not present sticky touch or at high temperatures. On plastic paints to reinforce alkali resistance, moderate abrasion and pedestrian traffic. Highlight the appearance of the surfaces. Easy horizontal and vertical application. VOC 24g / l - 2010 130 g / l. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 13035 Two-component glossy aliphatic polyurethane varnish. Exterior Interior. Excellent tenacity High chemical resistance, mechanical resistance and sunlight. Special for concrete floors, protection of absorbent marble, polyester resins (boats), wood in extreme environments. To protect ARTIMIX-20 MICROCEMENTO in workplaces and pavements. When high mechanical and chemical resistance is required. Available in satin and matt finish. On porous supports seal with a first coat of gloss. VOC 398g / l - 2,010 400 g / l. UNE-ENV 12633: 2003 Slip resistance. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 13035 Water-based one-component varnish for the protection of floors and decoration of the ARTIMIX 20 micro cement or similar porous supports (stone, mortar, printed concrete, brick, wood ...). Indoor and outdoor use. Shiny finish. Excellent wetting and consolidation of the support, blocking possible efflorescence. It can be applied as the first coat of the BARTIDUR A2C to minimize the usual increase of tone of the varnishes to the solvent. Easy horizontal and vertical application. Resistance to moderate abrasion and pedestrian traffic. COV 50- 2010 140g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET -
Ref. 06164 Polyurethane fixative for disintegrated supports. Great hardness and tenacity. Recommended for dry, wet or dusty concretes. Consolidates and protects concrete pavements. Sealing layer in porous floors before applying the ARTIDUR-X 100 or ARTIDUR A2C finishing polyurethanes. Outdoors or exposure to sunlight do not use as a visible layer, yellow. It can be seen in places protected from sunlight, increasing the tone of the concrete. Apply in well-ventilated places. Restoration of exterior wood very aged, saturate before painting. VOC 550g / l - 2010 750g / l.
-
Ref. 08063 Capa segelladora sobre superfícies poroses, absorbents o irregulars. S’aplica com a preparació del PROCÉS ARTIPUR, tant en acabats en color com transparent. Evita micro fissures o petits esquarteraments homogeneïtzant l’absorció entre les juntes en els enrajolats, facilitant la formació de la pel·lícula elàstica amb els elastòmers ARTIPUR. En qualsevol suport i circumstància, per assegurar un bon ancoratge, es recomanable afegir un 1% d’ADITOR PU promotor d’adherència . COV 28g/l - 2010 30g/l
FITXA TÈCNICA / FULLA SEGURETAT -
Ref. 08063 Sealing layer on porous, absorbent or irregular surfaces. It is applied as preparation of the ARTIPUR PROCESS, both in color and transparent finishes. Avoid micro-cracks or small squabbles. it homogenises the absorption between the joints in the tiles and facilitates the formation of the elastic film with the ARTIPUR elastomers. In any support and circumstance, to ensure a good anchoring, it is advisable to add a 1% Aditor PU adhesion promoter. VOC 28g / l - 2010 30g / l
-
Ref. 13031 Deep penetration fixator. Nanoparticles that act from the bottom of the porous materials until their surface consolidating action. Very breathable Substitutes acrylic copolymers in solvent. Dilution according to the state of disintegration of the support 1 p + 2-3 p water. Surfaces of aged paintings, plaster, cement, lime, brick, stone ... VOC 11g / l - 2010 30g / l
-
Ref. 01031 Acrylic fixative of great penetration. Hard and resistant. Seals old plastic paint, lime, tempera and degraded monolayers with microcracks. Slight increase in support tone Increase the performance of the finishes with plastic paints. Uniform absorptions and avoid color differences in the finishing layers. It comes in a very pure state. Dilution 1 p + 3-4 p. water by weight (according to absorption). Avoid the use application to avoid excess film. VOC 2g / l - 2010 30g / l.
-
Ref. 06131 High penetration consolidating impregnation for all types of construction materials. Absorption sealer on dusty backgrounds. Homogenizer product of the supports, avoids differences of joints and color of the finishes. Excellent fixer of deteriorated monolayers, broken cement, cement or lime mortar or stucco, exposed brick, concrete. It can soften old acrylic paints badly adhered and fix those that are in good condition. Breathable Treat the bottom without saturating. It slightly increases the tone of the support. Ideal to finish with PLIOART, with which you can mix to create glazes or intermediate layers. VOC 742g / l - 2,010 750g / l.
-
Ref. 07052 Mineral paint with natural silicates. Remineralizer of the stone. Chemical reaction with integration in the support. It does not film. Microporous finish is highly breathable to water vapor. Mold resistant in a natural way Ecological. Maximum duration, it does not crack, crack or decompose in its aging. On all types of mineral construction materials. Protection of natural and artificial stone, mortar or cement or lime plaster, exposed brick, concrete, old lime paints or old silicates. Respect the original textures. It has a natural appearance to the touch and sight. Highly recommended in rehabilitation and restoration of buildings and ancient and historic monuments. Dilute with ARTISIL IMPREGNATION to make glazes and regulate the viscosity and also recommended for priming. White and colors on request produced in the factory with inorganic pigments. VOC 15g / l - 2010 140g / l. In accordance with DIN 18636.
DATA SHEET /https://www.articsa.net/wp-content/uploads/2020/07/MSDS-ARTISIL-Eng.pdf CERTIFICATIONS
-
Ref. 05033 Matte ecological plastic paint, without residual monomers and totally biodegradable. Completely non-toxic and without any odor during application. Interiors with demands of respect for the environment. Excellent cover, no splashes, very well wet plasterboard and plaster casts. It meets the requirements of the market standard regulations for ecological plastic paints. White and soft colors. VOC 3g / l - 2010 30g / l.
-
Ref. 04013 Vinyl copolymers with a matt finish and silky to the touch. With pigments of granulometry selected to improve opacity and whiteness. Without rebros, it is perfect for reworking and for works against light. The slow initial drying and the great leveling favor the work in the interior decorations even with intense colors. It does not splash or drip. Soft application Very hard and easy to clean. Ideal also for plasterboard, plasters projected. White and colors. VOC 5g / l 2010 30g / l.
-
Ref. 04012 Vinyl copolymers. Highly decorative finish, matte front and silky against light and touch. With pigments of granulometry selected to improve opacity and whiteness. Recommended for high decoration, hotels and high standing jobs. Soft application High performance, excellent coverage, easily washable and low maintenance. Lacquered with airless gun. White, colors on request. VOC 12g / l - 2010 30g / l.
DATA SHEET (no available) / SAFETY DATA SHEET
-
Ref. 04041
Matte siliconized plastic paint. Multipurpose. Its minimal shrinkage during drying makes it ideal for working on difficult surfaces, alkaline supports, lime, cement, old paint, temper ... without tearing them off. Compatible with plaster casts and plasterboard. On highly degraded surfaces, prime with NEW TEC FIXO or FIXOART. It can be used as first coat of thicker coatings. Vertical waterproofing and good breathability. For interior decorations and for the rehabilitation of facades and light patios. Washable, resistant to wet rub. No splashes, easy application, very good coverage and high performance. White and colors. Also available in SILART EXTRA BLANCO 04042. VOC 22g / l - 2010 40g / l
UNE 48243 Certification: 2007. Plastic paint in aqueous dispersion, matt, in preservation and stability in the container, specular brightness, alkali and wet rub resistance, recoatability, hiding power.
-
Ref. 04020 Matt acrylic for interiors. Great value for the price. Special for applications with airless and do-it-yourself jobs. Covering power. Superior finish in economic coatings. White. VOC 5 g / l. Regulations 2010 30 g / l.
-
Ref. 04033 Matt interior acrylic. Special airless. Good cover Excellent whiteness Decorative industrial finish. Application on projected plaster. It does not splash. Superior finish in economic coatings. White. VOC 3g / l - 2010 30g / l.
-
Ref. 04032 Extra matt acrylic plastic paint. For protected interiors and exteriors. Good cover and good performance. For any type of white work and decoration in general. By having an extra matt finish, it conceals defects on large surfaces. Good wettability on plaster and plasterboard. Excellent finish in an economical product. Good application with roller and airless. White and soft colors. COV 3g / l - 2010 30g / l Certification UNE 48243: 2007. Certification UNE 48243: 2007. Plastic paint in aqueous dispersion, matt, for interiors, in conservation and stability in the container, specular gloss, alkali resistance and wet rub, repaintability, hiding power
-
Ref. 04028 Plastic paint based on acrylic copolymers. Conceived for protected exteriors and interiors in industrial works and maintenance. Matte finish. It conceals the defects of the supports on ceilings and large surfaces. Extra White and pastel colors upon request. VOC 4 g / l. Regulations 2010 30 g / l.
-
Ref. 04027 Plastic paint based on acrylic copolymers. Interior and exterior. Extra matt lacquered finish. No rebillos. Perfect for reworking and for work against light. Easy application with guaranteed finishes and easy maintenance. Very hard and easy to clean, exceeding 5,000 to double passes. Excellent coverage and performance. It does not splash. Resistant to mold. Extreme whiteness. White and soft colors in tintometry. All kinds of colors under minimum order. VOC 18g / l - 2010 30g / l.
-
Ref. 04021 Matte plastic paint based on acrylic copolymers. Very high performance. Very hard and washable over 5,000 to double passes. Resistant to the outside. Recommended especially for painting high quality interiors. Perfectly resistant on facades. Excellent hiding power and wet and dry opacity. It improves the performance of the pigments, ideal for preparing colors in the workshop. Professional use to achieve high performance in quality finishing work. It does not splash. White. VOC 7g / l - 2010 30g / l
-
Ref. 04022 Painting / coating based on acrylic copolymers with a very matt finish. Especially suitable for interior and exterior quality work, with high performance and minimal maintenance. Very hard and easy to clean. Ideal in the rehabilitation of facades. Vertical waterproofing and protector of rain and humidity. Good breathability Long durability Protection of concrete, improves resistance to carbonation. Resistant to mold. High performance and high covering power. Elegant and sober finish. It does not splash. White, black and colors. VOC 22g / l - 2010 40g / l Certification UNE 48244: 2007. Aqueous emulsion coating for exteriors, in water and water vapor permeability, adhesion, accelerated aging, hiding power, fineness, alkali resistance, mold and algae.
973 450 717|info@articsa.net
Ens plau informar-los que Artic disposa de noves certificacions en productes:
SUBSCRIU-TE I REP TOTES LES NOTÍCIES I NOVETATS
ON ESTEM