-
Ref. 16031 Masilla de renovació polivalent en pols, d'interior, per a aplicació manual. Permet reomplir, renovar i allisar. FITXA TÈCNICA -
Ref.04016 Vinyl plastic paint. Especially suitable for interior decoration. Great softness to the touch, excellent leveling power (no cuts are noticeable), resistance to wet rubbing (easy cleaning) and brightness of its white and soft colors. Matte and smooth finish, no splashes. Good results at a very competitive price. Available in the same white and pastel base format. Easily repaintable with minimal VOC content.
SECURITY SHEET / TECHNICAL SHEET -
Ref. Sanitizing matte plastic paint for exterior and interior use. Thanks to the new silver ion technology, it is resistant to bacteria and fungi, protecting and cleaning the applied surfaces. Almost odorless and with highly decorative features, such as resistance to wet rubbing, covering and performance. Excellent results. Suitable for any construction support but thanks to its sanitizing nature, it is especially suitable for hospitals, residences, schools, hotels and homes in general. VOC <1 g / L - 2010 30 g / L.
SECURITY SHEET -
Ref. 04033 Matt interior acrylic. Special airless. Good cover Excellent whiteness Decorative industrial finish. Application on projected plaster. It does not splash. Superior finish in economic coatings. White. VOC 3g / l - 2010 30g / l.
-
Ref. 04013 Vinyl copolymers with a matt finish and silky to the touch. With pigments of granulometry selected to improve opacity and whiteness. Without rebros, it is perfect for reworking and for works against light. The slow initial drying and the great leveling favor the work in the interior decorations even with intense colors. It does not splash or drip. Soft application Very hard and easy to clean. Ideal also for plasterboard, plasters projected. White and colors. VOC 5g / l 2010 30g / l.
-
Ref. 04012 Vinyl copolymers. Highly decorative finish, matte front and silky against light and touch. With pigments of granulometry selected to improve opacity and whiteness. Recommended for high decoration, hotels and high standing jobs. Soft application High performance, excellent coverage, easily washable and low maintenance. Lacquered with airless gun. White, colors on request. VOC 12g / l - 2010 30g / l.
DATA SHEET (no available) / SAFETY DATA SHEET
-
Ref. 01015 Thixotropic monolayer to water. Isolation of smoke stains, grease, mold, fruit juices, markers, drinks, nicotine, residual moisture. On old plastic and synthetic paintings aged and yellowed. In highly contaminated surfaces it is used as a primer for plastic paints and enamels, preferably in water, NEW TEC ESMALTE. High coverage power. No bleeding when applied to tar and bituminous surfaces. No odors or contamination during the application can be used in kitchens, bars, restaurants, food in operation ... Resistant to mold. It can be left as finished. White permanent and matt snow. VOC 35g / l - 2010 40g / l.
-
Ref. 01112 Thixotropic monolayer anti-stain, based on solvent-based acrylic resins. White universal matte paste. Recommended to cover the yellowish spots of fats, nicotine, mold and moisture of the walls and ceilings. Very little odor during its application. Excellent sealer It can be left as a finishing or repainting with plastic paints or with enamels to water or solvent and even with ARTIDUR A 2C polyurethanes. Does not splash or pick up. VOC 330g / l - 2.010 350g / l.
-
Ref. 04041
Matte siliconized plastic paint. Multipurpose. Its minimal shrinkage during drying makes it ideal for working on difficult surfaces, alkaline supports, lime, cement, old paint, temper ... without tearing them off. Compatible with plaster casts and plasterboard. On highly degraded surfaces, prime with NEW TEC FIXO or FIXOART. It can be used as first coat of thicker coatings. Vertical waterproofing and good breathability. For interior decorations and for the rehabilitation of facades and light patios. Washable, resistant to wet rub. No splashes, easy application, very good coverage and high performance. White and colors. Also available in SILART EXTRA BLANCO 04042. VOC 22g / l - 2010 40g / l
UNE 48243 Certification: 2007. Plastic paint in aqueous dispersion, matt, in preservation and stability in the container, specular brightness, alkali and wet rub resistance, recoatability, hiding power.
-
Ref. 01111 Preparation of plaster and wood. So white. It can be easily polished with fine sandpaper. For exteriors reinforce with ARTILUX enamel (3p. + 1p. ARTILUX). Consolidates "dead" plaster surfaces inconsistently. Special pladur and similar. No rebillos. VOC 305g / l - 2.010 350g / l.
-
Ref. 08121 Primer of the ARTIGUM PROCESS. Polymers saturated with moisture-reactive pigments. Essential on wet substrates (regulates adhesion and transpiration in the waterproofing process) and on porous ceramic surfaces and ceramics. Do not apply on vitrified surfaces, without opening the pore with ACIART or mechanically. Neutralizes moisture in plaster and cement. VOC 491g / l - 2,010 500g / l.
-
Ref. 04027 Plastic paint based on acrylic copolymers. Interior and exterior. Extra matt lacquered finish. No rebillos. Perfect for reworking and for work against light. Easy application with guaranteed finishes and easy maintenance. Very hard and easy to clean, exceeding 5,000 to double passes. Excellent coverage and performance. It does not splash. Resistant to mold. Extreme whiteness. White and soft colors in tintometry. All kinds of colors under minimum order. VOC 18g / l - 2010 30g / l.
-
Ref. 06131 High penetration consolidating impregnation for all types of construction materials. Absorption sealer on dusty backgrounds. Homogenizer product of the supports, avoids differences of joints and color of the finishes. Excellent fixer of deteriorated monolayers, broken cement, cement or lime mortar or stucco, exposed brick, concrete. It can soften old acrylic paints badly adhered and fix those that are in good condition. Breathable Treat the bottom without saturating. It slightly increases the tone of the support. Ideal to finish with PLIOART, with which you can mix to create glazes or intermediate layers. VOC 742g / l - 2,010 750g / l.
-
Ref. 13032 Coating and sealing of wood, fiber cement, plastic, tarpaulins .... Water base. Superior adhesion. Easy sanding Matte finish on walls. Ideal for repainting with enamels to water NEW TEC ESMALTE. VOC 40 g / l - 2,010 130g / l.
-
Ref. 13025 Polyvalent multipurpose primer on water base. Bonding on hard surfaces or without pores, metals (aluminum, galvanized, stainless steel, copper, ...), plastics (PVC, methacrylate, ..). Anti-corrosive performance on iron. Background and sealer on plaster and wood. Fast dry. It does not vitrify. Repaintable with mono and bi-component paints, solvent based and water. Free of lead and chrome. White and colors. VOC 25g / l - 2010 30g / l.
-
Ref. 13016 Lasur outdoors. Integral protector of wood. As finishing in interiors and exteriors. Resistant to UV rays, water, pollution, atmospheric agents and mild household cleaning products. Waterproofing, water repellent. Micro porous: Let the wood breathe. Avoid bluing. It does not film or quarte. It does not present sticky touch or at high temperatures. Do not apply on wood without pores (tropical, varnished ...), or on wood in contact with permanent water. Micronized pigments of long duration. Highlight the original grain. Matt and satin finish according to the number of layers. Colorless and COLOR CHART. VOC 30 g / l-2010 100g / l. It can also be used as a background to color and finish with all types of water or solvent based varnishes, such as those described below.
-
Ref. 13031 Deep penetration fixator. Nanoparticles that act from the bottom of the porous materials until their surface consolidating action. Very breathable Substitutes acrylic copolymers in solvent. Dilution according to the state of disintegration of the support 1 p + 2-3 p water. Surfaces of aged paintings, plaster, cement, lime, brick, stone ... VOC 11g / l - 2010 30g / l
-
Ref. 13017 Same features as NEW TEC ESMALTE, but satin. Its finish makes it very suitable in all types of decorations of high aesthetic quality. Furniture, walls in hotels, shops, shopping centers, shelves ... and spaces in general where a good mechanical and chemical resistance is required with a highly decorative finish. Excellent leveling Lacquered spray finish. Apply on well sealed surfaces and in thin layers. White and colors. VOC 60g / l - 2010 130g / l.
-
Ref. 13018 Same features as NEW TEC ESMALTE, but mate. Apply on well sealed surfaces and in thin layers. White and colors. VOC 60g / l - 2010 130g / l.
-
Ref. 13015 Aqueous acrylic enamel, mono component, polyvalent and bright. Absence of odors during application. For protection and decoration both indoors and outdoors in wooden, iron, metal, plastics, plaster, concrete, plasterboard ... Given the large number of applications see technical sheet to decide your primer according to support or needs. Easy maintenance, it is resistant to beverages, food and domestic cleaning liquids. Highly decorative and sanitary finishes. Excellent for applications in medical centers, pharmacies, hospitals, schools ..., where low toxicity and low cov. Easy application, extensibility and brochability. Excellent leveling It does not yellow. Apply on well sealed surfaces and in thin layers. Avoid unnecessary thicknesses. White and colors. VOC 60g / l - 2010 130g / l.
-
Ref. 13035 Water-based one-component varnish for the protection of floors and decoration of the ARTIMIX 20 micro cement or similar porous supports (stone, mortar, printed concrete, brick, wood ...). Indoor and outdoor use. Shiny finish. Excellent wetting and consolidation of the support, blocking possible efflorescence. It can be applied as the first coat of the BARTIDUR A2C to minimize the usual increase of tone of the varnishes to the solvent. Easy horizontal and vertical application. Resistance to moderate abrasion and pedestrian traffic. COV 50- 2010 140g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET -
Ref. 13051 Water based epoxy primer. Two-component Ideal for the anticorrosive treatment of metals. Bonding of non-ferrous metal surfaces, galvanized, stainless steel, aluminum, copper, light alloys, .... Both inside and outside, where it is necessary a great physicochemical resistance, in aqueous medium to avoid excessive odors. Especially suitable for finishing with bi-component epoxies and polyurethanes and for protecting iron reinforcements before adding mortar or concrete. Rust red and white colors. VOC 27g / l.2010 140g / l.
-
Ref. 04028 Plastic paint based on acrylic copolymers. Conceived for protected exteriors and interiors in industrial works and maintenance. Matte finish. It conceals the defects of the supports on ceilings and large surfaces. Extra White and pastel colors upon request. VOC 4 g / l. Regulations 2010 30 g / l.
-
Ref. 01031 Acrylic fixative of great penetration. Hard and resistant. Seals old plastic paint, lime, tempera and degraded monolayers with microcracks. Slight increase in support tone Increase the performance of the finishes with plastic paints. Uniform absorptions and avoid color differences in the finishing layers. It comes in a very pure state. Dilution 1 p + 3-4 p. water by weight (according to absorption). Avoid the use application to avoid excess film. VOC 2g / l - 2010 30g / l.
-
Ref. 02126 Forge effect metallic enamel with anticorrosive properties. Direct application to iron without the need for prior priming (priming with ANTIOXIDANTE PREART will reinforce the anticorrosive performance). Decoration and protection of any iron surface (lampposts, railings, bars, metal doors ...). Excellent adhesion, elasticity and resistance to the weather. High resistance to shock and abrasion. Highly decorative COLOR CHART. VOC 292 g / l - 2010 300 g / l
-
Ref. 08051 Epoxy primer for wet or dry cement surfaces prior to coating. Three components Great adhesion (also reinforced iron). Protection against humidity. Breathable Filling together. Interior / exterior waterproofing. Unventilated enclosures: pits, galleries, tunnels, basements, floors ... Repaintable with mono and bi-component paints. Essential in floors with residual humidity. Ivory color. Under minimum order, consult.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 05033 Matte ecological plastic paint, without residual monomers and totally biodegradable. Completely non-toxic and without any odor during application. Interiors with demands of respect for the environment. Excellent cover, no splashes, very well wet plasterboard and plaster casts. It meets the requirements of the market standard regulations for ecological plastic paints. White and soft colors. VOC 3g / l - 2010 30g / l.
-
Ref. 04020 Matt acrylic for interiors. Great value for the price. Special for applications with airless and do-it-yourself jobs. Covering power. Superior finish in economic coatings. White. VOC 5 g / l. Regulations 2010 30 g / l.
-
Ref. 01010 Rust converter. By chemical reaction, it transforms iron oxide into a well-bonded and passivated layer. Avoid mechanical cleaning. Temporary protection, priming with other more powerful antioxidants or painting at 24 hours. Banisters, doors, armors, areas of difficult access. Black-violet color once dry. VOC 15g / l - 2010 30g / l.
DATA SHEET / https://www.articsa.net/wp-content/uploads/2021/03/MSDS-BLINDOX-Eng.pdf -
Ref. 03111 Synthetic glossy maximum protection for woods on the outside and inside. Long durability of its brightness and transparency. Its characteristics make it very economical in the long term compared to other conventional products. Easy application and excellent leveling. VOC 388g / l - 2,010 400g / l.
-
Ref. 03114 Same features as BARTILUX, but satin. Its finish makes it highly recommended for decorative finishes. VOC 388g / l - 2,010 400g / l.
-
Ref. 13035 Two-component glossy aliphatic polyurethane varnish. Exterior Interior. Excellent tenacity High chemical resistance, mechanical resistance and sunlight. Special for concrete floors, protection of absorbent marble, polyester resins (boats), wood in extreme environments. To protect ARTIMIX-20 MICROCEMENTO in workplaces and pavements. When high mechanical and chemical resistance is required. Available in satin and matt finish. On porous supports seal with a first coat of gloss. VOC 398g / l - 2,010 400 g / l. UNE-ENV 12633: 2003 Slip resistance. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 03063 Water-based polyurethane varnish for concrete, printed concrete, stone and wood. Sparkly. Flexible. Resistance to sunlight. Renovation of veneers, slate, natural and artificial stone, masonry .... Protection of dirt on elastomers such as ARTIGUM GEL FIX, does not present sticky touch or at high temperatures. On plastic paints to reinforce alkali resistance, moderate abrasion and pedestrian traffic. Highlight the appearance of the surfaces. Easy horizontal and vertical application. VOC 24g / l - 2010 130 g / l. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 03112 Synthetic monocomponent for aggressive environments. Hard and tenacious on wood. Excellent brochability and leveling. Easy application Resistance to exteriors with high humidity. It contains absorbers of UV rays that provide great resistance to sunlight. VOC 388-2010 400g / l.
-
Ref. 07053 Consolidating fixative based on natural mineral silicates. Remineralizer of the stone. Extreme breathability Excellent for mixing with inorganic pigments and creating glazes and patinas. Do not use as a finishing coat for possible whitening problems, except when used as a pigmented glaze. Regulates the absorption of the subsequent finishes. Diluent of the ARTISIL mineral paint, to achieve the desired degree of opacity and to regulate the viscosity to adjust to the needs of the supports, which must always be minerals, stone, stucco, concrete ... VOC 5,5g / l - 2010 30g / l.
-
Ref. 07052 Mineral paint with natural silicates. Remineralizer of the stone. Chemical reaction with integration in the support. It does not film. Microporous finish is highly breathable to water vapor. Mold resistant in a natural way Ecological. Maximum duration, it does not crack, crack or decompose in its aging. On all types of mineral construction materials. Protection of natural and artificial stone, mortar or cement or lime plaster, exposed brick, concrete, old lime paints or old silicates. Respect the original textures. It has a natural appearance to the touch and sight. Highly recommended in rehabilitation and restoration of buildings and ancient and historic monuments. Dilute with ARTISIL IMPREGNATION to make glazes and regulate the viscosity and also recommended for priming. White and colors on request produced in the factory with inorganic pigments. VOC 15g / l - 2010 140g / l. In accordance with DIN 18636.
DATA SHEET /https://www.articsa.net/wp-content/uploads/2020/07/MSDS-ARTISIL-Eng.pdf CERTIFICATIONS
973 450 717|info@articsa.net
Ens plau informar-los que Artic disposa de noves certificacions en productes:
SUBSCRIU-TE I REP TOTES LES NOTÍCIES I NOVETATS
ON ESTEM