FITXA TÈCNICA / FITXA DE SEGURETAT It is necessary to control the humidity and absorption levels of the different supports, as well as their condition, situation and use in order to choose the most suitable processes.
-
Ref. 1230015 Pintura de senyalització viària, d'un component. Execel·lent qualitat-preu. Acabat semi-mate. Especialment indicat per a exterior. Admet perles refrectàries per millorar la visibilitat nocturna. No sangra a l'asfalt. Fàcil aplicació. Paviments de formigó, betun i quitrà. Ràpid assecat, al tacte 30 min, al trànsit rodat 4-6 hores en funció de condicions ambientals i gruixos aplicats. Color estàndard blanc. COV 421g/l-2.010 500g/l.
FITXA TÈCNICA / FITXA DE SEGURETAT -
Ref. 13026 Monocomponent paint for road marking, based on acrylic resins in aqueous emulsion. High covering power. Especially indicated for the painting of stripes, zebra crossings and inscriptions on all kinds of soils, roads, roads, highways, airports, parking lots, etc. Resistance to wear and fouling. The asphalt does not bleed. Fast drying Repaintable in 10-15 minutes and passable in 1 hour (depending on environmental conditions and thicknesses). Easy application Resistant to the weather, without yellowing. It accepts refractory pearls to improve night visibility. White and colors (under minimum order). VOC 15 g / L - 2010 140 g / L (2010).
-
Ref. 09121 Road marking paint, one component. Its resistance to abrasion by rolling of vehicles gives it an estimated durability twice as long as the usual vials in the market. Difficulty dirt with oil stains and tires. It accepts refractory pearls to improve night visibility. The asphalt does not bleed. Easy application Cement, bitumen and concrete pavements. Fast drying, to the touch 30 minutes, traffic rolled 4-6 hours depending on environmental conditions and thickness applied. Standard colors White and Yellow and rest colors in tintometry. VOC 395g / l - 2,010 500g / l.
-
Ref. 11511
Two-component solvent-based epoxy paint. Interiors without sunlight. Anti dust. Very hard and tenacious. Floors subjected to moderate abrasion. Excellent behavior in contact with water and spills of chemical products, oils, grease, gasoline, ... Parking, warehouses, warehouses ... Thicknesses slightly higher than polyurethanes, 70 to 80 microns (2 layers). Very advisable for finishing the self-leveling and multi-layer processes in interiors. Very adherent, it is self-priming. On low-porous coatings, apply a first coat of ARTIPOX AS-2C diluted at 30% with DISOLPOX and on slightly consolidated substrates ARTIPOX BV 2C. Semi gloss finish. White, standards and colors. VOC 173g / l - 2,010 500g / l.
Certification of hardness (pendulum Persoz) s / n UNE EN ISO 1522, gloss s / n UNE EN ISO 2813 and abrasion Taber s / n ASTM D 4060.
DATA SHEET / SAFETY DATA SHEET (A) / SAFETY DATA SHEET (B) / CERTIFICATION
-
Ref. 11165 Bicomponent aromatic polyurethane. Industrial pavements and parkings. Very indicated for an intense traffic. Bright, very decorative and resistant. Interiors Exterior protected from sunlight according to color. Fast drying, recoverable in 2-3 hours. Can be moved in 6 hours. Vehicles 24 hours. Easy application Self-priming, on very porous or disintegrated substrates apply a first impregnation layer, diluting between 40-70% with DISOLPUR or seal with ARTIDUR IMPREGNACIÓN X-40. High resistance to abrasion, water and spills of chemical products, oils, fats, gasoline. Parkings, warehouses and industrial warehouses. Apply in ventilated areas or wearing protective masks. Standard colors Gray, Green and English Red. Other colors are intense and intense. VOC 420g / l-2.010 500g / l.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 11031
Acrylic satin mono component paint, resistant to pedestrian traffic. Its non-slip touch without abrasives makes it ideal for sports floors. Interior and exterior. Protective finish on flexible pavements such as PAVIMENTO ARTIGUM, among others. Apply preferably on porous and absorbent supports. Vertical and horizontal application, special pediments. Signaling. Anti-carbonation protection of concrete. Raincoat. Additivated with ADITOR PU (08 Complements) is resistant to stagnant water, recommended on slopes lower than 1%. Resistant to mold. Easy application, high performance, flexible, excellent coverage. Standard colors, White and colors. VOC 20g / l - 2010 100g / l
Anti-carbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation)
-
Ref. 19592 Bicomponent epoxy filler. Especially indicated for the creation of half rods between vertical and horizontal vertical walls. Without detachment or retraction. It avoids the contamination in joints and zones of infection by accumulation of dirt and residues attacked by microorganisms. For the caulking of cracks. Fast painted. In active joints it is advisable to assemble with grid squared. VOC Not applicable.
-
Ref. 11532 Self-leveling epoxy varnish 100% solids. Similar characteristics to ARTIPOX AN 2C, but transparent. Finishing of the multilayer process with colored quartz. Maintains the volume after drying, does not reflow. Possibility of anti-slip finishes. Vertical and horizontal varnishing. On epoxy paints, it improves the fineness and leveling. At a minimum order of 100Kg (CompA). VOC 80g / l-2010 500g / l.
-
Ref. 11534 Self-leveling epoxy coating 100% solids. Solvent-free and odorless. Two components Mixed with aggregates (see FT) a colored mortar is obtained for the creation of continuous pavements of high aesthetic quality and high performance. As an intermediate leveling layer. Good chemical resistance Apply on absorbent, clean and dry substrates. Prime with ARTIPOX BV 2C to consolidate and regulate absorptions. Recommended thickness 2-4 mm. Before application, multi-layer processes (ARTIPOX RESIN 2C + aggregates) can be used to regulate floor imperfections. Distribute with notched trowel or rubber lip and pass the barbed roller for leveling and deaerating to avoid bubbles. Maintains the volume after drying, does not reflow. It can also be used without aggregates as paint. Smooth or anti-slip finishes with epoxies or polyurethanes from PAVEMENTS FINISH PAINTS section. Standard colors Red, Gray and Green. Other colors on request for factory production or dry cleaning. VOC 66G / l - 2010 500g / l.
-
Ref. 11531 100% solids multilayer epoxy impregnation. Two components Resin sealing of the support and filling base with aggregates and quartz. Solvent free. Waterproof concrete. Thickness between 2 and 5 mm. Joints between vertical and horizontal surfaces. To create continuous pavements without joints. In multilayer processes with quartz color sowing it is ideal to finish with self-leveling transparent coatings 100% solid ARTIPOX GLASS. In multilayer processes with non-colored aggregates, smooth, non-slip and anti-skid finishes can be obtained, of different grades according to granulometry. It can be enhanced with the ARTIPOX AN 2C self-leveling. It can be sealed by painting or varnishing with the bi-component products described in the PAVEMENTS PAINTINGS section. Resists abrasion and heavy traffic, industrial buildings, loading docks, ramps, slaughterhouses, fish markets, cold rooms, industrial kitchens, warehouses, chemical cleaning and disinfection treatments ... Dilute it to prime the concrete or use ARTIPOX BV 2C . VOC 16g / l - 2010 500g / l.
DATA SHEET / SAFETY DATA SHEET (A) / SAFETY DATA SHEET (B) -
Ref. 08052 Cementitious epoxy flooring self-extensible to water. Repair and renovation of floors of all types and uses. Warehouses, industries, pits, galleries, tunnels, basements ... Ideal in poorly ventilated places is completely non-toxic and odorless. Resistant to moisture from both the substrate and the environment. Excellent mechanical and chemical resistance. Soils that are not very consistent, disintegrated and / or wet, prime with EPOCRIL FH-3C. It can be repainted quickly (see the times) with paints and varnishes of mono and bi-component finish, epoxy, acrylics, polyurethanes, chlorinated rubber .... But it is highly recommended to apply epoxy to water NEW TEC SUELOS 2C. Maximum dilution 7 lt water in a kit (three components) of 55.5Kg. Color White beige garlic minimum order, consult. VOC 8g / l - 2010 500g / l.
-
Ref. 10593 Self-expanding mortar for leveling and screwing pavements. With hydraulic binders. For the creation of continuous pavements. High mechanical strength with minimum thickness, from 1 mm to 1 cm (in two layers), recommended between 2-4 mm. Dilution approx. 25 Kg + 7 liters (1 part ARTICRIL RESIN 6 + 3 parts of water). Prime the support and between layers with the same dilution mixture. Resistant to water, to acid, alkaline and disinfectant detergents. Accepts finished with paints and varnishes mono and bi-components, epoxy, acrylics, polyurethanes, chlorinated rubber ... Check the times in each case. For the renovation of cement and absorbent concrete pavements, in all types of parking, premises and industries. Spread with notched trowel and deaerate with barbed roller. Excellent leveling, satin finish. Gray. Other colors under a minimum order of 600 kg.
