DATA SHEET / SAFETY DATA SHEET It is necessary to control the humidity and absorption levels of the different supports, as well as their condition, situation and use in order to choose the most suitable processes.
-
Ref. 10031 Reactive polyvalent resin in high concentration aqueous solution. Hydraulic mortar improver, acts as an elasticizer, avoiding its tendency to crack and the formation of fissures. Plasticizes the mortars, avoiding retractions, improving fluidization in them and providing them with greater resistance to compression and abrasion. Bridge of union between old and new mortars, stuccos or mortars, improving their adherence. Sprinkle with cement between coats ... Dilution 1/3 water. VOC 1g / l - 2010 30g / l.
DATA SHEET / SAFETY DATA SHEET -
Ref. 11031
Acrylic satin mono component paint, resistant to pedestrian traffic. Its non-slip touch without abrasives makes it ideal for sports floors. Interior and exterior. Protective finish on flexible pavements such as PAVIMENTO ARTIGUM, among others. Apply preferably on porous and absorbent supports. Vertical and horizontal application, special pediments. Signaling. Anti-carbonation protection of concrete. Raincoat. Additivated with ADITOR PU (08 Complements) is resistant to stagnant water, recommended on slopes lower than 1%. Resistant to mold. Easy application, high performance, flexible, excellent coverage. Standard colors, White and colors. VOC 20g / l - 2010 100g / l
Anti-carbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation)
-
Ref. 02161
Two component bright aliphatic polyurethane. Direct anchoring on surfaces without pores, metals (aluminum, galvanized, stainless steel, copper, ...), plastics (PVC, methacrylate, polycarbonate ...), ceramics, etc. Great iron protector prepared with anticorrosive primers like ARTIDUR GALVÁNICO or NEW TEC ARTIPOX 2C. Very flexible, it resists blows. Slow aging and long duration. Industrial protection and marine and extreme environments, with excellent behavior against sunrays, acid rain and extreme temperatures. Ideal on machinery, facades of sheet metal, furniture ... Very resistant to mechanical abrasion, interior and exterior pavements of moderate traffic. Good resistance to chemical aggressions and standing water. Highly decorative finish, lacquered application with short hair roller and airless. White, black and permanent colors. VOC 380g / l - 2,010 500g / l.
UNE 48274: 2003 Certification in Gloss, Abrasion resistance (Taber), flexibility, hardness (Persoz), traction adhesion, stagnant water resistance, alkalis and acids, UV slits, and protection against slippage according to UNE-ENV 12633: 2003
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (B) / CERTIFICATIONS
-
Ref. 06164 Polyurethane fixative for disintegrated supports. Great hardness and tenacity. Recommended for dry, wet or dusty concretes. Consolidates and protects concrete pavements. Sealing layer in porous floors before applying the ARTIDUR-X 100 or ARTIDUR A2C finishing polyurethanes. Outdoors or exposure to sunlight do not use as a visible layer, yellow. It can be seen in places protected from sunlight, increasing the tone of the concrete. Apply in well-ventilated places. Restoration of exterior wood very aged, saturate before painting. VOC 550g / l - 2010 750g / l.
-
Ref. 11165 Bicomponent aromatic polyurethane. Industrial pavements and parkings. Very indicated for an intense traffic. Bright, very decorative and resistant. Interiors Exterior protected from sunlight according to color. Fast drying, recoverable in 2-3 hours. Can be moved in 6 hours. Vehicles 24 hours. Easy application Self-priming, on very porous or disintegrated substrates apply a first impregnation layer, diluting between 40-70% with DISOLPUR or seal with ARTIDUR IMPREGNACIÓN X-40. High resistance to abrasion, water and spills of chemical products, oils, fats, gasoline. Parkings, warehouses and industrial warehouses. Apply in ventilated areas or wearing protective masks. Standard colors Gray, Green and English Red. Other colors are intense and intense. VOC 420g / l-2.010 500g / l.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 10588 Cementitious waterproofing mortar of high thickness, flexible and with some elasticity. Two components It allows waterproofing supports with movements and expansions, both horizontal and vertical (does not hang). Resistant to contact with permanent water in terraces, planters, fountains, tunnels, tanks, swimming pools, wells, irrigation channels, gutters, insulating materials, flexible elements, walls, water tables .... Absorbs and seals cracks less than 1 mm. Compatible with other ARTIGUM and ARTIPUR elastomers. It has characteristics that help protect against carbonation. Resistant to weathering and tiling. Breathable to water vapor.
-
Ref. 10592 Continuous powder coating on the basis of high performance hydraulic micro cement. Based on calcium cements and marble powder of different granulometries, it is presented in two modes FINE and THICK. It is used for the realization of highly decorative continuous coatings, both vertical and horizontal. Direct adherence on any type of material. Very hard and tenacious. Apply ARTIPUR SELLADOR as a primer and between layers, it will provide a better homogenization of the absorptions, and in supports with different materials (tiling, ceramics ...) a better regularization. It is advisable to seal with NEW TEC BARNIZ varnish or on floors or in continuous immersion BARTIDUR A-2C. Low thermal diffusion Antistatic Kitchens, toilets, workshops, restaurants, hotels, shops ... interior and exterior decorations. White color. Easily colorable.
-
Ref. 10593 Self-expanding mortar for leveling and screwing pavements. With hydraulic binders. For the creation of continuous pavements. High mechanical strength with minimum thickness, from 1 mm to 1 cm (in two layers), recommended between 2-4 mm. Dilution approx. 25 Kg + 7 liters (1 part ARTICRIL RESIN 6 + 3 parts of water). Prime the support and between layers with the same dilution mixture. Resistant to water, to acid, alkaline and disinfectant detergents. Accepts finished with paints and varnishes mono and bi-components, epoxy, acrylics, polyurethanes, chlorinated rubber ... Check the times in each case. For the renovation of cement and absorbent concrete pavements, in all types of parking, premises and industries. Spread with notched trowel and deaerate with barbed roller. Excellent leveling, satin finish. Gray. Other colors under a minimum order of 600 kg.
-
Ref. 11534 Self-leveling epoxy coating 100% solids. Solvent-free and odorless. Two components Mixed with aggregates (see FT) a colored mortar is obtained for the creation of continuous pavements of high aesthetic quality and high performance. As an intermediate leveling layer. Good chemical resistance Apply on absorbent, clean and dry substrates. Prime with ARTIPOX BV 2C to consolidate and regulate absorptions. Recommended thickness 2-4 mm. Before application, multi-layer processes (ARTIPOX RESIN 2C + aggregates) can be used to regulate floor imperfections. Distribute with notched trowel or rubber lip and pass the barbed roller for leveling and deaerating to avoid bubbles. Maintains the volume after drying, does not reflow. It can also be used without aggregates as paint. Smooth or anti-slip finishes with epoxies or polyurethanes from PAVEMENTS FINISH PAINTS section. Standard colors Red, Gray and Green. Other colors on request for factory production or dry cleaning. VOC 66G / l - 2010 500g / l.
-
Ref. 11511
Two-component solvent-based epoxy paint. Interiors without sunlight. Anti dust. Very hard and tenacious. Floors subjected to moderate abrasion. Excellent behavior in contact with water and spills of chemical products, oils, grease, gasoline, ... Parking, warehouses, warehouses ... Thicknesses slightly higher than polyurethanes, 70 to 80 microns (2 layers). Very advisable for finishing the self-leveling and multi-layer processes in interiors. Very adherent, it is self-priming. On low-porous coatings, apply a first coat of ARTIPOX AS-2C diluted at 30% with DISOLPOX and on slightly consolidated substrates ARTIPOX BV 2C. Semi gloss finish. White, standards and colors. VOC 173g / l - 2,010 500g / l.
Certification of hardness (pendulum Persoz) s / n UNE EN ISO 1522, gloss s / n UNE EN ISO 2813 and abrasion Taber s / n ASTM D 4060.
DATA SHEET / SAFETY DATA SHEET (A) / SAFETY DATA SHEET (B) / CERTIFICATION
-
Ref. 11533 Low viscosity epoxy resin for sealing and consolidating the support. Two components Especially indicated for the consolidation and preparation of continuous self-leveling epoxy floors ARTIPOX AN-2C and ARTIPOX RESIN-2C multi-layer systems colored or transparent. Great penetration, wetting and adhesion. Application in chemical, pharmaceutical, meat, slaughterhouse, cold storage, etc ..., on any horizontal or vertical surface when mechanical or sanitary resistance is required ... Minimum order of 100Kg (Comp A). VOC 135g / l - 2010 500g
-
Ref. 11532 Self-leveling epoxy varnish 100% solids. Similar characteristics to ARTIPOX AN 2C, but transparent. Finishing of the multilayer process with colored quartz. Maintains the volume after drying, does not reflow. Possibility of anti-slip finishes. Vertical and horizontal varnishing. On epoxy paints, it improves the fineness and leveling. At a minimum order of 100Kg (CompA). VOC 80g / l-2010 500g / l.
-
Ref. 19592 Bicomponent epoxy filler. Especially indicated for the creation of half rods between vertical and horizontal vertical walls. Without detachment or retraction. It avoids the contamination in joints and zones of infection by accumulation of dirt and residues attacked by microorganisms. For the caulking of cracks. Fast painted. In active joints it is advisable to assemble with grid squared. VOC Not applicable.
-
Ref. 11531 100% solids multilayer epoxy impregnation. Two components Resin sealing of the support and filling base with aggregates and quartz. Solvent free. Waterproof concrete. Thickness between 2 and 5 mm. Joints between vertical and horizontal surfaces. To create continuous pavements without joints. In multilayer processes with quartz color sowing it is ideal to finish with self-leveling transparent coatings 100% solid ARTIPOX GLASS. In multilayer processes with non-colored aggregates, smooth, non-slip and anti-skid finishes can be obtained, of different grades according to granulometry. It can be enhanced with the ARTIPOX AN 2C self-leveling. It can be sealed by painting or varnishing with the bi-component products described in the PAVEMENTS PAINTINGS section. Resists abrasion and heavy traffic, industrial buildings, loading docks, ramps, slaughterhouses, fish markets, cold rooms, industrial kitchens, warehouses, chemical cleaning and disinfection treatments ... Dilute it to prime the concrete or use ARTIPOX BV 2C . VOC 16g / l - 2010 500g / l.
DATA SHEET / SAFETY DATA SHEET (A) / SAFETY DATA SHEET (B) -
Ref. 08063 Capa segelladora sobre superfícies poroses, absorbents o irregulars. S’aplica com a preparació del PROCÉS ARTIPUR, tant en acabats en color com transparent. Evita micro fissures o petits esquarteraments homogeneïtzant l’absorció entre les juntes en els enrajolats, facilitant la formació de la pel·lícula elàstica amb els elastòmers ARTIPUR. En qualsevol suport i circumstància, per assegurar un bon ancoratge, es recomanable afegir un 1% d’ADITOR PU promotor d’adherència . COV 28g/l - 2010 30g/l
FITXA TÈCNICA / FULLA SEGURETAT -
Ref. 08063 Sealing layer on porous, absorbent or irregular surfaces. It is applied as preparation of the ARTIPUR PROCESS, both in color and transparent finishes. Avoid micro-cracks or small squabbles. it homogenises the absorption between the joints in the tiles and facilitates the formation of the elastic film with the ARTIPUR elastomers. In any support and circumstance, to ensure a good anchoring, it is advisable to add a 1% Aditor PU adhesion promoter. VOC 28g / l - 2010 30g / l
-
Ref. 08062 One component polyurethane waterproof elastomer. Less elastic than the other ARTIPUR, but totally flexible. Superior resistance to mechanical abrasion, can be used as TOP layer on the other membranes in the ARTIPUR PROCESS on floors, balconies, roofs, terraces and in general spaces with moderate traffic. Good resistance to chemical abrasion in spills of water, diluted acids and alkalis, oils and fats ... Washable. Excellent for painting exterior and interior pavements. On hard, vitrified or low porous surfaces, add Aditor PU (1%) promoter On poorly forged, porous or absorbent surfaces, apply a previous layer of ARTIPUR SELLADOR + Aditor PU. Colors on request gray, red and tile. VOC 3g / l - 2010 30g / l.
DATA SHEET/ SAFETY DATA SHEET -
Ref. 13035 Two-component glossy aliphatic polyurethane varnish. Exterior Interior. Excellent tenacity High chemical resistance, mechanical resistance and sunlight. Special for concrete floors, protection of absorbent marble, polyester resins (boats), wood in extreme environments. To protect ARTIMIX-20 MICROCEMENTO in workplaces and pavements. When high mechanical and chemical resistance is required. Available in satin and matt finish. On porous supports seal with a first coat of gloss. VOC 398g / l - 2,010 400 g / l. UNE-ENV 12633: 2003 Slip resistance. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 08052 Cementitious epoxy flooring self-extensible to water. Repair and renovation of floors of all types and uses. Warehouses, industries, pits, galleries, tunnels, basements ... Ideal in poorly ventilated places is completely non-toxic and odorless. Resistant to moisture from both the substrate and the environment. Excellent mechanical and chemical resistance. Soils that are not very consistent, disintegrated and / or wet, prime with EPOCRIL FH-3C. It can be repainted quickly (see the times) with paints and varnishes of mono and bi-component finish, epoxy, acrylics, polyurethanes, chlorinated rubber .... But it is highly recommended to apply epoxy to water NEW TEC SUELOS 2C. Maximum dilution 7 lt water in a kit (three components) of 55.5Kg. Color White beige garlic minimum order, consult. VOC 8g / l - 2010 500g / l.
-
Ref. 08051 Epoxy primer for wet or dry cement surfaces prior to coating. Three components Great adhesion (also reinforced iron). Protection against humidity. Breathable Filling together. Interior / exterior waterproofing. Unventilated enclosures: pits, galleries, tunnels, basements, floors ... Repaintable with mono and bi-component paints. Essential in floors with residual humidity. Ivory color. Under minimum order, consult.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 06046 Water-repellent and water-repellent, based on fluorinated acrylic resins. It does not form a film. Destined to the protection of porous materials against the penetration of oils, fats, lubricants ... on surfaces such as tiles, reconstructed stones, marble, concrete, cement, natural stones, etc. Pearl effect. Without smell. It does not increase the tone of the support, it is invisible. VOC 10 g / L - 2.010 30g / L.
-
Ref. 13055
Water based bicomponent sanitary epoxy paint. Interior pavements subjected to moderate abrasion. Anti-carbonation protection of concrete indoors. Decontaminable walls and walls. Easily washable It does not vitrify. Tenacious. Ideal to finish in EPOCRIL-3C processes on wet soils. With benefits similar to the other two-component in terms of adhesion and chemical and mechanical resistance, but being water-based, it does not smell when applied, which makes it indispensable for jobs in food industries, warehouses, medical centers, enclosures or poorly ventilated . Glossy finish. White, standard and colors. Low VOC 18g / l - 2010 140g / l.
Certification of reaction to fire of floor coverings according to UNE-EN ISO 11925-2: 2011 and UNE-EN ISO 9239-1: 2011 obtaining the classification CLASS BFL-S1, of reaction to the generic fire according to UNE-eN 13823: 2012 + A1: 2016 with classification CLASS B-S1, D0 of hardness (pendulum Persoz) according to UNE in ISO 1522, gloss according to UNE in ISO 2813, Taber abrasion according to ASTM D 4060, and CE marking according to UNE-eN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET (A) / SAFETY DATA SHEET (B) / CERTIFICATION (reaction to fire) / CERTIFICATION (reaction to fire) / CERTIFICATION (hardness, gloss, abrasion) / CERTIFICATION (CE marking)
/ CERTIFICACIÓN (agua potable) -
Ref. 13026 Monocomponent paint for road marking, based on acrylic resins in aqueous emulsion. High covering power. Especially indicated for the painting of stripes, zebra crossings and inscriptions on all kinds of soils, roads, roads, highways, airports, parking lots, etc. Resistance to wear and fouling. The asphalt does not bleed. Fast drying Repaintable in 10-15 minutes and passable in 1 hour (depending on environmental conditions and thicknesses). Easy application Resistant to the weather, without yellowing. It accepts refractory pearls to improve night visibility. White and colors (under minimum order). VOC 15 g / L - 2010 140 g / L (2010).
-
Ref. 08024 Elastic and waterproof continuous pavement. Resistant to abrasion and wear. Passable. Very resistant to the exterior and extreme climates. Its elastic finish absorbs shock and silence, making it smooth to the step and resistant to structural movements without cracking. To reinforce the finish of the ARTIGUM PROCESS wherever there is a need for more resistance and aesthetics. Great durability Excellent as a continuous coating on sports floors, schools, playgrounds ... Very good adhesion to the supports. It can be left as finishing or sealing with elastic paints like ARTIGUM TOP, ARTIPUR SUELOS, among others. Very comfortable application when presented as plastic mass ready to use. Decorative finish. Red color, can be supplied in any color upon minimum order. VOC 2 g / L - 2010 140 g
