Maximum respect to the appearance of existing walls. Maximum protection, breathability and long duration.
-
Ref. 07053 Consolidating fixative based on natural mineral silicates. Remineralizer of the stone. Extreme breathability Excellent for mixing with inorganic pigments and creating glazes and patinas. Do not use as a finishing coat for possible whitening problems, except when used as a pigmented glaze. Regulates the absorption of the subsequent finishes. Diluent of the ARTISIL mineral paint, to achieve the desired degree of opacity and to regulate the viscosity to adjust to the needs of the supports, which must always be minerals, stone, stucco, concrete ... VOC 5,5g / l - 2010 30g / l.
-
Ref. 03063 Water-based polyurethane varnish for concrete, printed concrete, stone and wood. Sparkly. Flexible. Resistance to sunlight. Renovation of veneers, slate, natural and artificial stone, masonry .... Protection of dirt on elastomers such as ARTIGUM GEL FIX, does not present sticky touch or at high temperatures. On plastic paints to reinforce alkali resistance, moderate abrasion and pedestrian traffic. Highlight the appearance of the surfaces. Easy horizontal and vertical application. VOC 24g / l - 2010 130 g / l. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 13035 Two-component glossy aliphatic polyurethane varnish. Exterior Interior. Excellent tenacity High chemical resistance, mechanical resistance and sunlight. Special for concrete floors, protection of absorbent marble, polyester resins (boats), wood in extreme environments. To protect ARTIMIX-20 MICROCEMENTO in workplaces and pavements. When high mechanical and chemical resistance is required. Available in satin and matt finish. On porous supports seal with a first coat of gloss. VOC 398g / l - 2,010 400 g / l. UNE-ENV 12633: 2003 Slip resistance. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 06134 Hydrophobic consolidating impregnation for porous materials. Creates surface film integrated in the support. With high penetration, it seals the pores, hardening the dusty supports, brick, face, concrete, mortars, old lime stuccos ... Suitable for limestones, sandstones and granites. When necessary a waterproof finish is not invisible. Transparent finish with slight tone, which increases as successive layers are applied. Accepts pigmentation to make glazes. Waterproof and with superficial perspiration. 741 g / L - 2010 750 g / L Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 06181 Consolidating and hydrophobic cortical impregnation in solvent base. To stop finishing, but can be repainted with solvent paints. For stones, concrete and stuccos. Great penetrating power. High values of resistance to diffusion for a better protection against carbonation and a lower resistance to diffusion of water vapor, breathable. Saturate until homogenization of the support. Apply from the bottom up. Wet layer on wet. Colorless, slightly increases the tone of the support, without filmifying. VOC 742g / l - 2,010 750g / l.
-
Ref. 06141 Water repellent based on modified polysiloxanes. Long duration, over 10 years. Invisible, it does not modify the background tone. For exposed work, bricks, stone, stuccos ... in any climate. Also for textiles, wood and non-cracked porous materials. Microporous, does not form superficial film. Great water-repellent capacity and high perspiration. Resistant to mold. It prevents the formation of salts and does not green with time. Self-cleaning, keeps the surface clean, hindering the adherence of dust and dirt. Do not dilute, apply to saturation in two layers from bottom to top crossed wet on wet. The immersion treatment is also possible. VOC 748g / l - 2,010 750g / l.
-
Ref. 13035 Water-based one-component varnish for the protection of floors and decoration of the ARTIMIX 20 micro cement or similar porous supports (stone, mortar, printed concrete, brick, wood ...). Indoor and outdoor use. Shiny finish. Excellent wetting and consolidation of the support, blocking possible efflorescence. It can be applied as the first coat of the BARTIDUR A2C to minimize the usual increase of tone of the varnishes to the solvent. Easy horizontal and vertical application. Resistance to moderate abrasion and pedestrian traffic. COV 50- 2010 140g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET -
Ref. 06042 Siloxane water repellent with water-based nanoparticles for mineral supports. Excellent penetration Invisible. It does not film and does not modify the appearance of the support. Microporous, waterproof and transpires water vapor. Self-cleaning, keeps the surface clean and free of dust and dirt. Avoid the formation of salts. Resistant to mold. Ideal for facades of exposed work stuccos, fiber cement, natural stone, etc. In the application on paints and coatings to water or solvent, reinforces the hydrophobic performance. VOC 1- 2010 30g / l.
-
Ref. 06048 Water repellent and sealant for porous and absorbent surfaces. Excellent penetration Glossy finish. Compatible with alkaline and cementitious supports. Interior and exterior. It does not yellow. Avoid the adherence of dust and dirt. It is micro porous and allows the support to breathe. It prevents the formation of salts and the growth of fungi. Long-term treatment 3 g / l - 2010 30 g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 06046 Water-repellent and water-repellent, based on fluorinated acrylic resins. It does not form a film. Destined to the protection of porous materials against the penetration of oils, fats, lubricants ... on surfaces such as tiles, reconstructed stones, marble, concrete, cement, natural stones, etc. Pearl effect. Without smell. It does not increase the tone of the support, it is invisible. VOC 10 g / L - 2.010 30g / L.
-
Ref. 06132 Consolidating and water repellent impregnation varnish. Solvent base. Creates a film inferior to conventional varnishes. Very penetrating, hardens and seals any construction material. Special for exposed work, concrete and broken stone. When necessary a waterproof finish is not invisible. Increase the tone of the support. Apply only on porous surfaces. A layer allows satin finish, successive layers can increase it to bright. Accept pigmentation. Waterproof and breathable superficially to water vapor. VOC 672g / l - 2,010 750g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
