-
Ref. 08063 Sealing layer on porous, absorbent or irregular surfaces. It is applied as preparation of the ARTIPUR PROCESS, both in color and transparent finishes. Avoid micro-cracks or small squabbles. it homogenises the absorption between the joints in the tiles and facilitates the formation of the elastic film with the ARTIPUR elastomers. In any support and circumstance, to ensure a good anchoring, it is advisable to add a 1% Aditor PU adhesion promoter. VOC 28g / l - 2010 30g / l
-
Ref. 13031 Deep penetration fixator. Nanoparticles that act from the bottom of the porous materials until their surface consolidating action. Very breathable Substitutes acrylic copolymers in solvent. Dilution according to the state of disintegration of the support 1 p + 2-3 p water. Surfaces of aged paintings, plaster, cement, lime, brick, stone ... VOC 11g / l - 2010 30g / l
-
Ref. 01031 Acrylic fixative of great penetration. Hard and resistant. Seals old plastic paint, lime, tempera and degraded monolayers with microcracks. Slight increase in support tone Increase the performance of the finishes with plastic paints. Uniform absorptions and avoid color differences in the finishing layers. It comes in a very pure state. Dilution 1 p + 3-4 p. water by weight (according to absorption). Avoid the use application to avoid excess film. VOC 2g / l - 2010 30g / l.
-
Ref. 06182 Consolidating in depth prior to restoration. Based on water-based colloidal silica dispersion. High penetration and non-water repellent. Fixing of supports before their screed with mortars or stuccos. Do not use as a final layer, it could react whitening. To consolidate natural stones of all kinds, acidic or basic. Neutralizes the acidity caused by carbonation. Consolidates the aged concrete and recovers the original consistency. It does not need as long to cure as Silicato de Etilo. Apply from the bottom up. VOC 1g / l - 2010 30g / l.
-
Ref. 06131 High penetration consolidating impregnation for all types of construction materials. Absorption sealer on dusty backgrounds. Homogenizer product of the supports, avoids differences of joints and color of the finishes. Excellent fixer of deteriorated monolayers, broken cement, cement or lime mortar or stucco, exposed brick, concrete. It can soften old acrylic paints badly adhered and fix those that are in good condition. Breathable Treat the bottom without saturating. It slightly increases the tone of the support. Ideal to finish with PLIOART, with which you can mix to create glazes or intermediate layers. VOC 742g / l - 2,010 750g / l.
-
Ref. 07052 Mineral paint with natural silicates. Remineralizer of the stone. Chemical reaction with integration in the support. It does not film. Microporous finish is highly breathable to water vapor. Mold resistant in a natural way Ecological. Maximum duration, it does not crack, crack or decompose in its aging. On all types of mineral construction materials. Protection of natural and artificial stone, mortar or cement or lime plaster, exposed brick, concrete, old lime paints or old silicates. Respect the original textures. It has a natural appearance to the touch and sight. Highly recommended in rehabilitation and restoration of buildings and ancient and historic monuments. Dilute with ARTISIL IMPREGNATION to make glazes and regulate the viscosity and also recommended for priming. White and colors on request produced in the factory with inorganic pigments. VOC 15g / l - 2010 140g / l. In accordance with DIN 18636.
DATA SHEET /https://www.articsa.net/wp-content/uploads/2020/07/MSDS-ARTISIL-Eng.pdf CERTIFICATIONS
-
Ref. 04041
Matte siliconized plastic paint. Multipurpose. Its minimal shrinkage during drying makes it ideal for working on difficult surfaces, alkaline supports, lime, cement, old paint, temper ... without tearing them off. Compatible with plaster casts and plasterboard. On highly degraded surfaces, prime with NEW TEC FIXO or FIXOART. It can be used as first coat of thicker coatings. Vertical waterproofing and good breathability. For interior decorations and for the rehabilitation of facades and light patios. Washable, resistant to wet rub. No splashes, easy application, very good coverage and high performance. White and colors. Also available in SILART EXTRA BLANCO 04042. VOC 22g / l - 2010 40g / l
UNE 48243 Certification: 2007. Plastic paint in aqueous dispersion, matt, in preservation and stability in the container, specular brightness, alkali and wet rub resistance, recoatability, hiding power.
-
Ref. 04022 Painting / coating based on acrylic copolymers with a very matt finish. Especially suitable for interior and exterior quality work, with high performance and minimal maintenance. Very hard and easy to clean. Ideal in the rehabilitation of facades. Vertical waterproofing and protector of rain and humidity. Good breathability Long durability Protection of concrete, improves resistance to carbonation. Resistant to mold. High performance and high covering power. Elegant and sober finish. It does not splash. White, black and colors. VOC 22g / l - 2010 40g / l Certification UNE 48244: 2007. Aqueous emulsion coating for exteriors, in water and water vapor permeability, adhesion, accelerated aging, hiding power, fineness, alkali resistance, mold and algae.
-
Ref. 04023
Satin plastic paint based on acrylic copolymers. Very noble to look with highly silky finish For interior and exterior decorations. Washable, resistant to wet rubbing, exceeding 8,000 double passes. Softness of an enamel, health benefits. Excellent for applications in medical centers, pharmacists, hospitals, schools ..., where low toxicity is required. Minimum maintenance Exteriors and facades in aggressive, industrial, marine, contaminated or humid environments. Anti-carbonation protection of concrete. Raincoat. Additivated with ADITOR PU (08 Complementos) is resistant to standing water. Resistant to mold. Easy application, high performance. Flexible. Excellent cover. White and colors. VOC 20g / l - 2010 100g / l
Anticarbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation) / CERTIFICATION (CE Marking)
-
Ref. 02161
Two component bright aliphatic polyurethane. Direct anchoring on surfaces without pores, metals (aluminum, galvanized, stainless steel, copper, ...), plastics (PVC, methacrylate, polycarbonate ...), ceramics, etc. Great iron protector prepared with anticorrosive primers like ARTIDUR GALVÁNICO or NEW TEC ARTIPOX 2C. Very flexible, it resists blows. Slow aging and long duration. Industrial protection and marine and extreme environments, with excellent behavior against sunrays, acid rain and extreme temperatures. Ideal on machinery, facades of sheet metal, furniture ... Very resistant to mechanical abrasion, interior and exterior pavements of moderate traffic. Good resistance to chemical aggressions and standing water. Highly decorative finish, lacquered application with short hair roller and airless. White, black and permanent colors. VOC 380g / l - 2,010 500g / l.
UNE 48274: 2003 Certification in Gloss, Abrasion resistance (Taber), flexibility, hardness (Persoz), traction adhesion, stagnant water resistance, alkalis and acids, UV slits, and protection against slippage according to UNE-ENV 12633: 2003
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (B) / CERTIFICATIONS
-
Ref. 07053 Consolidating fixative based on natural mineral silicates. Remineralizer of the stone. Extreme breathability Excellent for mixing with inorganic pigments and creating glazes and patinas. Do not use as a finishing coat for possible whitening problems, except when used as a pigmented glaze. Regulates the absorption of the subsequent finishes. Diluent of the ARTISIL mineral paint, to achieve the desired degree of opacity and to regulate the viscosity to adjust to the needs of the supports, which must always be minerals, stone, stucco, concrete ... VOC 5,5g / l - 2010 30g / l.
