FITXA TÈCNICA / FITXA DE SEGURETAT Check in the cleaning section, for previous actions in the following restoration processes.
-
Ref. Sanitizing matte plastic paint for exterior and interior use. Thanks to the new silver ion technology, it is resistant to bacteria and fungi, protecting and cleaning the applied surfaces. Almost odorless and with highly decorative features, such as resistance to wet rubbing, covering and performance. Excellent results. Suitable for any construction support but thanks to its sanitizing nature, it is especially suitable for hospitals, residences, schools, hotels and homes in general. VOC <1 g / L - 2010 30 g / L.
SECURITY SHEET -
Ref. 15592 Flexible waterproofing mortar, for the coating of insulating plates. Without retraction. It can be armed with ARTIMIX 9 MESH to improve the mechanical resistance, the possible dilatations or the blows. It does not need water. It comes in two components powder and resin. Uniform finish and excellent leveling. Reduce the consumption of the coating or finishing paint. Its planimetry and softness of application allow finishes with finer and more aesthetic coatings than other mortars on the market.
-
Ref. 15591 Permanent adhesive mortar for all kinds of construction materials. Highly adhesive leveling paste for fixing and gluing the insulating plates in the Artictherm process. It comes in two components powder and resin. Once the mixture is made, it becomes a smooth paste that is easy to apply without detaching or retracting. Matt Gray finish.
-
Ref. 04024 Paint / coating similar to the ARTICRIL MILENNIUM, but with siloxane binders that give it a water-resistant and non-stick nature, keeping the supports dry and clean. Very matt finish. Especially indicated in the rehabilitation of facades in urban climates for its resistance to dirt. Very hard and easy to clean. Vertical waterproofing and protector of rain and humidity. Good breathability Long durability Protection of concrete, improves resistance to carbonation. Resistance to mold. High performance and high covering power. White and colors. VOC 22g / l - 2010 40g / l. UNE 48244 certification: 2007.
-
Ref. 07033
Waterproof coating with textured elastic acrylic binder. Multifunctional Anticarbonatation. Breathable Absorbs cracks up to 2 mm. It can be assembled with reticulated mesh. Great filling power and homogenization of very irregular surfaces. Thicknesses of 1 - 1.5 mm are achieved. Different rough finishes, chopped, gotelé, ... Composed with hollow mineral particles, with air at very low pressure, has a very low thermal and acoustic transmission power and a great power of isolation. It keeps the supports hot and dry giving comfort in the interiors. Is light. Convenient application. White and colors. VOC 4g / l - 2010 40g / l.
Anti-carbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation) / CERTIFICATION (CE Marking)
-
Ref. 07036 Smooth elastic waterproofing coating similar to ARTIGUM LISO, also with binder based on acrylic resins, but mixed with siloxanicas that give it a water-resistant and non-stick nature of the dirt, keeping the supports dry and clean. Very indicated in urban climates for its resistance to dirt. White and colors. COC 3g / l - 2010 140g / l. Certificate of anti-carbonation according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005
DATA SHEET / SAFETY DATA SHEET -
Ref. 07034
Smooth elastic waterproof coating. With acrylic binder It contains hollow mineral particles and natural fibers, which reinforce its lightness. Waterproofing, decoration and insulation of facades and interiors. Its layer thickness and its elasticity allow to absorb microcracks up to 1 mm. It can be assembled with reticulated mesh. Uniformity of finishing, corrects deficiencies of the support. Anticarbonatation. Breathable No possibility of cracking when aging. High resistance to alkalinity, sunlight, high condensation and extreme climates. Mate. White and colors. VOC 3g / l - 2010 140g / l.
Anti-carbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation) / CERTIFICATION (CE Marking) -
Ref. 07031 Rough acrylic coating. With microlaminar extenders, which give it a high resistance to aging compared with other acrylics on the market. Aesthetic finish on exteriors and facades. Great filling power and homogenization of very irregular surfaces. Thicknesses of 1 - 1.5 mm are achieved. Vertical raincoat with good breathability. Different smooth finishes, rough, chopped, monolayer ... Resistant to mold. The good drying behavior allows an easy application. Work on consolidated and stable surfaces. White and colors VOC 4g / l - 2010 140g / l.
-
Ref. 07032 Acrylic coating. Smooth and stony finish. Ideal in public works with concrete formwork, on highways, ports, retaining walls, ships ... Vertical raincoat with good breathability. To fill the irregularities and coke of the supports. Resistant to mold. White and colors. VOC 5g / l - 2010 140g / l.
-
Ref. 07062 Flexible acrylic mortar to siloxane. Especially indicated for the waterproofing and decoration of facades. The projected application or trowel allows different textured finishes. The siloxane content gives it a waterproof and non-stick character. Easily covers microfusures. Ideal to regularize supports. Excellent resistance to weathering and good adhesion to concrete, mortar, fiber cement, etc... Breathable to water vapor and impermeable to rainwater. White and colors. COV 4g/l – 2010 140g/l.
-
Ref. 13055
Water based bicomponent sanitary epoxy paint. Interior pavements subjected to moderate abrasion. Anti-carbonation protection of concrete indoors. Decontaminable walls and walls. Easily washable It does not vitrify. Tenacious. Ideal to finish in EPOCRIL-3C processes on wet soils. With benefits similar to the other two-component in terms of adhesion and chemical and mechanical resistance, but being water-based, it does not smell when applied, which makes it indispensable for jobs in food industries, warehouses, medical centers, enclosures or poorly ventilated . Glossy finish. White, standard and colors. Low VOC 18g / l - 2010 140g / l.
Certification of reaction to fire of floor coverings according to UNE-EN ISO 11925-2: 2011 and UNE-EN ISO 9239-1: 2011 obtaining the classification CLASS BFL-S1, of reaction to the generic fire according to UNE-eN 13823: 2012 + A1: 2016 with classification CLASS B-S1, D0 of hardness (pendulum Persoz) according to UNE in ISO 1522, gloss according to UNE in ISO 2813, Taber abrasion according to ASTM D 4060, and CE marking according to UNE-eN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET (A) / SAFETY DATA SHEET (B) / CERTIFICATION (reaction to fire) / CERTIFICATION (reaction to fire) / CERTIFICATION (hardness, gloss, abrasion) / CERTIFICATION (CE marking)
/ CERTIFICACIÓN (agua potable)
