-
Ref. 11533 Low viscosity epoxy resin for sealing and consolidating the support. Two components Especially indicated for the consolidation and preparation of continuous self-leveling epoxy floors ARTIPOX AN-2C and ARTIPOX RESIN-2C multi-layer systems colored or transparent. Great penetration, wetting and adhesion. Application in chemical, pharmaceutical, meat, slaughterhouse, cold storage, etc ..., on any horizontal or vertical surface when mechanical or sanitary resistance is required ... Minimum order of 100Kg (Comp A). VOC 135g / l - 2010 500g
-
Ref. 08062 One component polyurethane waterproof elastomer. Less elastic than the other ARTIPUR, but totally flexible. Superior resistance to mechanical abrasion, can be used as TOP layer on the other membranes in the ARTIPUR PROCESS on floors, balconies, roofs, terraces and in general spaces with moderate traffic. Good resistance to chemical abrasion in spills of water, diluted acids and alkalis, oils and fats ... Washable. Excellent for painting exterior and interior pavements. On hard, vitrified or low porous surfaces, add Aditor PU (1%) promoter On poorly forged, porous or absorbent surfaces, apply a previous layer of ARTIPUR SELLADOR + Aditor PU. Colors on request gray, red and tile. VOC 3g / l - 2010 30g / l.
DATA SHEET/ SAFETY DATA SHEET -
Ref. 10588 Cementitious waterproofing mortar of high thickness, flexible and with some elasticity. Two components It allows waterproofing supports with movements and expansions, both horizontal and vertical (does not hang). Resistant to contact with permanent water in terraces, planters, fountains, tunnels, tanks, swimming pools, wells, irrigation channels, gutters, insulating materials, flexible elements, walls, water tables .... Absorbs and seals cracks less than 1 mm. Compatible with other ARTIGUM and ARTIPUR elastomers. It has characteristics that help protect against carbonation. Resistant to weathering and tiling. Breathable to water vapor.
-
Ref. 08024 Elastic and waterproof continuous pavement. Resistant to abrasion and wear. Passable. Very resistant to the exterior and extreme climates. Its elastic finish absorbs shock and silence, making it smooth to the step and resistant to structural movements without cracking. To reinforce the finish of the ARTIGUM PROCESS wherever there is a need for more resistance and aesthetics. Great durability Excellent as a continuous coating on sports floors, schools, playgrounds ... Very good adhesion to the supports. It can be left as finishing or sealing with elastic paints like ARTIGUM TOP, ARTIPUR SUELOS, among others. Very comfortable application when presented as plastic mass ready to use. Decorative finish. Red color, can be supplied in any color upon minimum order. VOC 2 g / L - 2010 140 g
-
Ref. 13055
Water based bicomponent sanitary epoxy paint. Interior pavements subjected to moderate abrasion. Anti-carbonation protection of concrete indoors. Decontaminable walls and walls. Easily washable It does not vitrify. Tenacious. Ideal to finish in EPOCRIL-3C processes on wet soils. With benefits similar to the other two-component in terms of adhesion and chemical and mechanical resistance, but being water-based, it does not smell when applied, which makes it indispensable for jobs in food industries, warehouses, medical centers, enclosures or poorly ventilated . Glossy finish. White, standard and colors. Low VOC 18g / l - 2010 140g / l.
Certification of reaction to fire of floor coverings according to UNE-EN ISO 11925-2: 2011 and UNE-EN ISO 9239-1: 2011 obtaining the classification CLASS BFL-S1, of reaction to the generic fire according to UNE-eN 13823: 2012 + A1: 2016 with classification CLASS B-S1, D0 of hardness (pendulum Persoz) according to UNE in ISO 1522, gloss according to UNE in ISO 2813, Taber abrasion according to ASTM D 4060, and CE marking according to UNE-eN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET (A) / SAFETY DATA SHEET (B) / CERTIFICATION (reaction to fire) / CERTIFICATION (reaction to fire) / CERTIFICATION (hardness, gloss, abrasion) / CERTIFICATION (CE marking)
/ CERTIFICACIÓN (agua potable) -
Ref. 13035 Two-component glossy aliphatic polyurethane varnish. Exterior Interior. Excellent tenacity High chemical resistance, mechanical resistance and sunlight. Special for concrete floors, protection of absorbent marble, polyester resins (boats), wood in extreme environments. To protect ARTIMIX-20 MICROCEMENTO in workplaces and pavements. When high mechanical and chemical resistance is required. Available in satin and matt finish. On porous supports seal with a first coat of gloss. VOC 398g / l - 2,010 400 g / l. UNE-ENV 12633: 2003 Slip resistance. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 06046 Water-repellent and water-repellent, based on fluorinated acrylic resins. It does not form a film. Destined to the protection of porous materials against the penetration of oils, fats, lubricants ... on surfaces such as tiles, reconstructed stones, marble, concrete, cement, natural stones, etc. Pearl effect. Without smell. It does not increase the tone of the support, it is invisible. VOC 10 g / L - 2.010 30g / L.
-
Ref. 10592 Continuous powder coating on the basis of high performance hydraulic micro cement. Based on calcium cements and marble powder of different granulometries, it is presented in two modes FINE and THICK. It is used for the realization of highly decorative continuous coatings, both vertical and horizontal. Direct adherence on any type of material. Very hard and tenacious. Apply ARTIPUR SELLADOR as a primer and between layers, it will provide a better homogenization of the absorptions, and in supports with different materials (tiling, ceramics ...) a better regularization. It is advisable to seal with NEW TEC BARNIZ varnish or on floors or in continuous immersion BARTIDUR A-2C. Low thermal diffusion Antistatic Kitchens, toilets, workshops, restaurants, hotels, shops ... interior and exterior decorations. White color. Easily colorable.
-
Ref. 10031 Reactive polyvalent resin in high concentration aqueous solution. Hydraulic mortar improver, acts as an elasticizer, avoiding its tendency to crack and the formation of fissures. Plasticizes the mortars, avoiding retractions, improving fluidization in them and providing them with greater resistance to compression and abrasion. Bridge of union between old and new mortars, stuccos or mortars, improving their adherence. Sprinkle with cement between coats ... Dilution 1/3 water. VOC 1g / l - 2010 30g / l.
DATA SHEET / SAFETY DATA SHEET -
Ref. 06164 Polyurethane fixative for disintegrated supports. Great hardness and tenacity. Recommended for dry, wet or dusty concretes. Consolidates and protects concrete pavements. Sealing layer in porous floors before applying the ARTIDUR-X 100 or ARTIDUR A2C finishing polyurethanes. Outdoors or exposure to sunlight do not use as a visible layer, yellow. It can be seen in places protected from sunlight, increasing the tone of the concrete. Apply in well-ventilated places. Restoration of exterior wood very aged, saturate before painting. VOC 550g / l - 2010 750g / l.
-
Ref. 08063 Capa segelladora sobre superfícies poroses, absorbents o irregulars. S’aplica com a preparació del PROCÉS ARTIPUR, tant en acabats en color com transparent. Evita micro fissures o petits esquarteraments homogeneïtzant l’absorció entre les juntes en els enrajolats, facilitant la formació de la pel·lícula elàstica amb els elastòmers ARTIPUR. En qualsevol suport i circumstància, per assegurar un bon ancoratge, es recomanable afegir un 1% d’ADITOR PU promotor d’adherència . COV 28g/l - 2010 30g/l
FITXA TÈCNICA / FULLA SEGURETAT -
Ref. 08063 Sealing layer on porous, absorbent or irregular surfaces. It is applied as preparation of the ARTIPUR PROCESS, both in color and transparent finishes. Avoid micro-cracks or small squabbles. it homogenises the absorption between the joints in the tiles and facilitates the formation of the elastic film with the ARTIPUR elastomers. In any support and circumstance, to ensure a good anchoring, it is advisable to add a 1% Aditor PU adhesion promoter. VOC 28g / l - 2010 30g / l
