DATA SHEET / SAFETY DATA SHEET It is necessary to control the humidity and absorption levels of the different supports, as well as their condition, situation and use in order to choose the most suitable processes.
-
Ref. 10031 Reactive polyvalent resin in high concentration aqueous solution. Hydraulic mortar improver, acts as an elasticizer, avoiding its tendency to crack and the formation of fissures. Plasticizes the mortars, avoiding retractions, improving fluidization in them and providing them with greater resistance to compression and abrasion. Bridge of union between old and new mortars, stuccos or mortars, improving their adherence. Sprinkle with cement between coats ... Dilution 1/3 water. VOC 1g / l - 2010 30g / l.
DATA SHEET / SAFETY DATA SHEET -
Ref. 11031
Acrylic satin mono component paint, resistant to pedestrian traffic. Its non-slip touch without abrasives makes it ideal for sports floors. Interior and exterior. Protective finish on flexible pavements such as PAVIMENTO ARTIGUM, among others. Apply preferably on porous and absorbent supports. Vertical and horizontal application, special pediments. Signaling. Anti-carbonation protection of concrete. Raincoat. Additivated with ADITOR PU (08 Complements) is resistant to stagnant water, recommended on slopes lower than 1%. Resistant to mold. Easy application, high performance, flexible, excellent coverage. Standard colors, White and colors. VOC 20g / l - 2010 100g / l
Anti-carbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation)
-
Ref. 02161
Two component bright aliphatic polyurethane. Direct anchoring on surfaces without pores, metals (aluminum, galvanized, stainless steel, copper, ...), plastics (PVC, methacrylate, polycarbonate ...), ceramics, etc. Great iron protector prepared with anticorrosive primers like ARTIDUR GALVÁNICO or NEW TEC ARTIPOX 2C. Very flexible, it resists blows. Slow aging and long duration. Industrial protection and marine and extreme environments, with excellent behavior against sunrays, acid rain and extreme temperatures. Ideal on machinery, facades of sheet metal, furniture ... Very resistant to mechanical abrasion, interior and exterior pavements of moderate traffic. Good resistance to chemical aggressions and standing water. Highly decorative finish, lacquered application with short hair roller and airless. White, black and permanent colors. VOC 380g / l - 2,010 500g / l.
UNE 48274: 2003 Certification in Gloss, Abrasion resistance (Taber), flexibility, hardness (Persoz), traction adhesion, stagnant water resistance, alkalis and acids, UV slits, and protection against slippage according to UNE-ENV 12633: 2003
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (B) / CERTIFICATIONS
-
Ref. 06164 Polyurethane fixative for disintegrated supports. Great hardness and tenacity. Recommended for dry, wet or dusty concretes. Consolidates and protects concrete pavements. Sealing layer in porous floors before applying the ARTIDUR-X 100 or ARTIDUR A2C finishing polyurethanes. Outdoors or exposure to sunlight do not use as a visible layer, yellow. It can be seen in places protected from sunlight, increasing the tone of the concrete. Apply in well-ventilated places. Restoration of exterior wood very aged, saturate before painting. VOC 550g / l - 2010 750g / l.
-
Ref. 11165 Bicomponent aromatic polyurethane. Industrial pavements and parkings. Very indicated for an intense traffic. Bright, very decorative and resistant. Interiors Exterior protected from sunlight according to color. Fast drying, recoverable in 2-3 hours. Can be moved in 6 hours. Vehicles 24 hours. Easy application Self-priming, on very porous or disintegrated substrates apply a first impregnation layer, diluting between 40-70% with DISOLPUR or seal with ARTIDUR IMPREGNACIÓN X-40. High resistance to abrasion, water and spills of chemical products, oils, fats, gasoline. Parkings, warehouses and industrial warehouses. Apply in ventilated areas or wearing protective masks. Standard colors Gray, Green and English Red. Other colors are intense and intense. VOC 420g / l-2.010 500g / l.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 10588 Cementitious waterproofing mortar of high thickness, flexible and with some elasticity. Two components It allows waterproofing supports with movements and expansions, both horizontal and vertical (does not hang). Resistant to contact with permanent water in terraces, planters, fountains, tunnels, tanks, swimming pools, wells, irrigation channels, gutters, insulating materials, flexible elements, walls, water tables .... Absorbs and seals cracks less than 1 mm. Compatible with other ARTIGUM and ARTIPUR elastomers. It has characteristics that help protect against carbonation. Resistant to weathering and tiling. Breathable to water vapor.
-
Ref. 10592 Continuous powder coating on the basis of high performance hydraulic micro cement. Based on calcium cements and marble powder of different granulometries, it is presented in two modes FINE and THICK. It is used for the realization of highly decorative continuous coatings, both vertical and horizontal. Direct adherence on any type of material. Very hard and tenacious. Apply ARTIPUR SELLADOR as a primer and between layers, it will provide a better homogenization of the absorptions, and in supports with different materials (tiling, ceramics ...) a better regularization. It is advisable to seal with NEW TEC BARNIZ varnish or on floors or in continuous immersion BARTIDUR A-2C. Low thermal diffusion Antistatic Kitchens, toilets, workshops, restaurants, hotels, shops ... interior and exterior decorations. White color. Easily colorable.
-
Ref. 10593 Self-expanding mortar for leveling and screwing pavements. With hydraulic binders. For the creation of continuous pavements. High mechanical strength with minimum thickness, from 1 mm to 1 cm (in two layers), recommended between 2-4 mm. Dilution approx. 25 Kg + 7 liters (1 part ARTICRIL RESIN 6 + 3 parts of water). Prime the support and between layers with the same dilution mixture. Resistant to water, to acid, alkaline and disinfectant detergents. Accepts finished with paints and varnishes mono and bi-components, epoxy, acrylics, polyurethanes, chlorinated rubber ... Check the times in each case. For the renovation of cement and absorbent concrete pavements, in all types of parking, premises and industries. Spread with notched trowel and deaerate with barbed roller. Excellent leveling, satin finish. Gray. Other colors under a minimum order of 600 kg.
-
Ref. 11534 Self-leveling epoxy coating 100% solids. Solvent-free and odorless. Two components Mixed with aggregates (see FT) a colored mortar is obtained for the creation of continuous pavements of high aesthetic quality and high performance. As an intermediate leveling layer. Good chemical resistance Apply on absorbent, clean and dry substrates. Prime with ARTIPOX BV 2C to consolidate and regulate absorptions. Recommended thickness 2-4 mm. Before application, multi-layer processes (ARTIPOX RESIN 2C + aggregates) can be used to regulate floor imperfections. Distribute with notched trowel or rubber lip and pass the barbed roller for leveling and deaerating to avoid bubbles. Maintains the volume after drying, does not reflow. It can also be used without aggregates as paint. Smooth or anti-slip finishes with epoxies or polyurethanes from PAVEMENTS FINISH PAINTS section. Standard colors Red, Gray and Green. Other colors on request for factory production or dry cleaning. VOC 66G / l - 2010 500g / l.
-
Ref. 11511
Two-component solvent-based epoxy paint. Interiors without sunlight. Anti dust. Very hard and tenacious. Floors subjected to moderate abrasion. Excellent behavior in contact with water and spills of chemical products, oils, grease, gasoline, ... Parking, warehouses, warehouses ... Thicknesses slightly higher than polyurethanes, 70 to 80 microns (2 layers). Very advisable for finishing the self-leveling and multi-layer processes in interiors. Very adherent, it is self-priming. On low-porous coatings, apply a first coat of ARTIPOX AS-2C diluted at 30% with DISOLPOX and on slightly consolidated substrates ARTIPOX BV 2C. Semi gloss finish. White, standards and colors. VOC 173g / l - 2,010 500g / l.
Certification of hardness (pendulum Persoz) s / n UNE EN ISO 1522, gloss s / n UNE EN ISO 2813 and abrasion Taber s / n ASTM D 4060.
DATA SHEET / SAFETY DATA SHEET (A) / SAFETY DATA SHEET (B) / CERTIFICATION
-
Ref. 11533 Low viscosity epoxy resin for sealing and consolidating the support. Two components Especially indicated for the consolidation and preparation of continuous self-leveling epoxy floors ARTIPOX AN-2C and ARTIPOX RESIN-2C multi-layer systems colored or transparent. Great penetration, wetting and adhesion. Application in chemical, pharmaceutical, meat, slaughterhouse, cold storage, etc ..., on any horizontal or vertical surface when mechanical or sanitary resistance is required ... Minimum order of 100Kg (Comp A). VOC 135g / l - 2010 500g
-
Ref. 11532 Self-leveling epoxy varnish 100% solids. Similar characteristics to ARTIPOX AN 2C, but transparent. Finishing of the multilayer process with colored quartz. Maintains the volume after drying, does not reflow. Possibility of anti-slip finishes. Vertical and horizontal varnishing. On epoxy paints, it improves the fineness and leveling. At a minimum order of 100Kg (CompA). VOC 80g / l-2010 500g / l.
