Continuous waterproofing with liquid membranes based on aliphatic polyurethane resins in aqueous base. More information on our website in the section waterproofing.
In any support and circumstance, to ensure a good anchoring, it is advisable to add a 1% Aditor PU adhesion promoter (08 Complements), especially in the first layer. Do not apply the process when there are expected frosts, temperatures lower than + 5oC, higher than + 30oC or rain. You can get anti-slip finishes by mixing with ANTISKID (08 Accessories).
-
Ref. 08061 Aliphatic polyurethane waterproofing elastomer with acrylic emulsion, similar to ARTIPUR FLEX. It has a brilliant finish. Its mechanical and chemical resistances are superior, which makes it top of the ARTIPUR PROCESS, in cases where it is necessary to achieve a sanitary finish, more easily washable, more resistant to pedestrian traffic, among others. On hard, vitrified or low porous surfaces, add mixing with Aditor PU promoter (1%). Colors in stock: Gray, Red, Tile. VOC 63g / l - 2010 140g / l.
-
Ref. 08065
Aliphatic polyurethane waterproofing elastomer with acrylic emulsion. Water base. Single component Ideal for the continuous waterproofing of terraces, roofs, roofs, planters and concrete supports. Flexible, creates elastic membrane. 180% Elongation Once dry it does not dissolve with water. It maintains its mechanical properties of -15 oC and +70 oC. It is advisable to build with ARTIMAT structural geotextile based on polyester nappa, which unifies the two layers and improves the mechanical resistance to breakage and impact. Resistant to weathering and tiling. Anticarbonatation. Good adhesion to most supports. Unalterable with defrost cycles. Absorbs micro cracks less than 1 mm. Easy maintenance and repair. It allows to apply high thicknesses. It does not yellow. Resistant to standing water. Good resistance to pedestrian traffic. Satin finish. Possible brilliant finish by applying ARTIPUR COLORES or ARTIPUR SUELOS. Gray, Red. VOC 9.7g / l - 2.010 140g /
Certification of adhesion by direct traction, UNE-EN 1542: 1999, permeability to water vapor, UNE-EN ISO 7783: 2012, permeability to liquid water, UNE- EN 1062-3: 2008, permeability to carbon dioxide, UNE -eN 1062-6: 2003, of the watertightness to water. Method B s / n UNE EN 1928: 2000, of the variation of tensile properties (strength and elongation), UNE EN ISO 527-1 (2012) and UNE EN ISO 527-3 (1996) - AC (2002) after of artificial aging due to prolonged exposure to the combination of UV radiation, high temperature and water, UNE EN 1297: 2006.
DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (adhesion and permeabilities) / CERTIFICATION (traction and sealing)
-
Ref. 08063 Capa segelladora sobre superfícies poroses, absorbents o irregulars. S’aplica com a preparació del PROCÉS ARTIPUR, tant en acabats en color com transparent. Evita micro fissures o petits esquarteraments homogeneïtzant l’absorció entre les juntes en els enrajolats, facilitant la formació de la pel·lícula elàstica amb els elastòmers ARTIPUR. En qualsevol suport i circumstància, per assegurar un bon ancoratge, es recomanable afegir un 1% d’ADITOR PU promotor d’adherència . COV 28g/l - 2010 30g/l
FITXA TÈCNICA / FULLA SEGURETAT -
Ref. 08063 Sealing layer on porous, absorbent or irregular surfaces. It is applied as preparation of the ARTIPUR PROCESS, both in color and transparent finishes. Avoid micro-cracks or small squabbles. it homogenises the absorption between the joints in the tiles and facilitates the formation of the elastic film with the ARTIPUR elastomers. In any support and circumstance, to ensure a good anchoring, it is advisable to add a 1% Aditor PU adhesion promoter. VOC 28g / l - 2010 30g / l
-
Ref. 08062 One component polyurethane waterproof elastomer. Less elastic than the other ARTIPUR, but totally flexible. Superior resistance to mechanical abrasion, can be used as TOP layer on the other membranes in the ARTIPUR PROCESS on floors, balconies, roofs, terraces and in general spaces with moderate traffic. Good resistance to chemical abrasion in spills of water, diluted acids and alkalis, oils and fats ... Washable. Excellent for painting exterior and interior pavements. On hard, vitrified or low porous surfaces, add Aditor PU (1%) promoter On poorly forged, porous or absorbent surfaces, apply a previous layer of ARTIPUR SELLADOR + Aditor PU. Colors on request gray, red and tile. VOC 3g / l - 2010 30g / l.
DATA SHEET/ SAFETY DATA SHEET -
Ref. 08064 EPolyurethane elastomer monocomponent waterproof, transparent and finishing. Excellent elasticity Stable to the sun's rays. It does not yellow. Resistant to stagnant industrial water (if ADITOR PU is added), dilute acids and alkalis, oils, fats, ... Very stable in its aging. It maintains its mechanical properties from -15oC to + 70oC. Leveling without pores, bubbles or irregularities. Passable. Temporarily facilitates the repair of cracked glass. Application on balconies, terraces, skylights, regeneration of PVC plates, methacrylate, polycarbonate, reinforced glazing. Protection of wood, vitrified fabrics, insulating polyurethane, artificial stone, natural. Easy use and maintenance. On hard, vitrified or slightly porous surfaces, add Aditor PU promoter (1%). VOC 50g / l - 2010 140g / l.
DATA SHEET / SAFETY DATA SHEET
