TECHNICAL DATA SHEET (CONSULT)
-
Ref. 01095 Elastic bituminous waterproofing emulsion. Seals microcracks and porosities. Absorbs dilatations of works. On concrete, cement, interior lining, industrial waters, hidden areas, walls, foundations, medians, deteriorated asphalt surfaces. Priming and finishing. It can be applied on wet supports that are not waterlogged. Finishing on asphalt surfaces. Resistant to mold. Resistance to alkalinity and to be covered with mortars or tiles. To improve the mechanical resistance or to create bonding bridges with mortars, sprinkle with aggregates or gravel. VOC 3g / l - 2010 140g / l.
-
Ref. 08021
Waterproof liquid elastomer in water base. Long duration Elongation of 350%. It maintains the characteristics between -15 oC and +80 oC and in abrupt changes of temperature. Certain tacking at high temperatures. Unalterable with defrost cycles. Creates membrane for continuous waterproofing. It is mainly applied on vertical and horizontal surfaces, with slopes or not, which can be found on roofs, roofs, facades, planters, screen walls, dividing walls, cannelloni and water collectors, as well as for filling small surfaces such as cracks and holes. Valid for a large number of construction materials such as concrete, cement, fiber cement, tiles, ceramics, asphalt, bitumens, polyurethane foam, stone, aluminum, galvanized .... Resistant to mold. Advisable to build with ARTIMAT, structural geotextile based on polyester nappa, which unifies the two layers and improves the mechanical resistance to breakage and impact. For more passable finishes and / or with dammed water apply last layer of ARTIGUM TOP. Colors: white, gray, black, tile, red and green. VOC 7g / l - 2010 140g / l
Certificate of anti-carbonation according to UNE-EN 13295: 2005, water tightness according to UNE EN 1928: 2000, traction property (resistance and elongation) according to UNE EN ISO 527-1 (96) and UNE in ISO 527-3 (2003) -AC (2002) and artificial aging due to prolonged exposure to the combination of UV radiation, high temperature and water according to UNE EN 1297: 2006.
TECHNICAL DATA SHEET (CONSULT)
-
Ref. 08023 Like the ARTIGUM, but it contains fiberglass particles in its composition, creating an internal armor. Ideal for difficult places to glaze, small and medium surfaces, and to repair cracks. With no difficulty of application, it can be applied to trowel, palette, rubber lip, roller. It can be supplied on request with micronized glass fiber for applications with projection machines. Colors Gray, red, white and tile. VOC 7g / l - 2010 140g / l
TECHNICAL DATA SHEET (CONSULT)
-
Ref. 07321 Transparent and waterproof elastomeric coating. Indicated for the repair, protection and waterproofing of facades and roofs with glazed finishes, tiles and tiles, as well as stones and slate, where a transparent finish is necessary. Sealing of sanitary ceramics eliminating joints and protecting from detachment. On ceramic supports, clean and tone with STONEART. It can be reinforced by arming with the fiberglass ARTIMAT FIX mesh that is completely absorbed, transparent and that unifies splices and overlaps. To prevent adhesion of the external dirt, varnish with BARTICRIL PUR. It can also be repainted with a variety of opaque finishes. It is also an excellent consolidant and protector of concrete. 03063. VOC 7g / l - 2010 140g / l.
TECHNICAL DATA SHEET (CONSULT)
-
Ref. 07034 Smooth elastic waterproof coating. With acrylic binder It contains hollow mineral particles and natural fibers, which reinforce its lightness. Waterproofing, decoration and insulation of facades and interiors. Its layer thickness and its elasticity allow to absorb microcracks up to 1 mm. It can be assembled with reticulated mesh. Uniformity of finishing, corrects deficiencies of the support. Anticarbonatation. Breathable No possibility of cracking when aging. High resistance to alkalinity, sunlight, high condensation and extreme climates. Mate. White and colors. VOC 3g / l - 2010 140g / l. Anti-carbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
TECHNICAL DATA SHEET (CONSULT) / DECLARATION OF PERFORMANCE (CE MARKING)
-
Ref. 08022
Finish tread, satin. Highly washable Pleasant to the step. Complete the ARTIGUM PROCESS. Elastic thin layer and resistant to moderate mechanical aggressions. Protection against the sun's rays. Aditivated with Aditor PU (08 Complementos) is resistant to standing water. Recommended on slopes less than 1%. It retains the characteristics in extreme temperatures and in sudden changes. Colors in stock: White, Gray, Black, Tile, Red and Green. Other colors with tintometric system or on request. VOC 20g / l - 2010 140g / l
Certificate of anti-carbonation according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
TECHNICAL DATA SHEET (CONSULT) / DECLARATION OF CONFORMITY
-
Ref. 10588 Cementitious waterproofing mortar of high thickness, flexible and with some elasticity. Two components It allows waterproofing supports with movements and expansions, both horizontal and vertical (does not hang). Resistant to contact with permanent water in terraces, planters, fountains, tunnels, tanks, swimming pools, wells, irrigation channels, gutters, insulating materials, flexible elements, walls, water tables .... Absorbs and seals cracks less than 1 mm. Compatible with other ARTIGUM and ARTIPUR elastomers. It has characteristics that help protect against carbonation. Resistant to weathering and tiling. Breathable to water vapor.
TECHNICAL DATA SHEET (CONSULT) / DECLARATION OF CONFORMITY
-
Ref. 08061 Aliphatic polyurethane waterproofing elastomer with acrylic emulsion, similar to ARTIPUR FLEX. It has a brilliant finish. Its mechanical and chemical resistances are superior, which makes it top of the ARTIPUR PROCESS, in cases where it is necessary to achieve a sanitary finish, more easily washable, more resistant to pedestrian traffic, among others. On hard, vitrified or low porous surfaces, add mixing with Aditor PU promoter (1%). Colors in stock: Gray, Red, Tile. VOC 63g / l - 2010 140g / l.
TECHNICAL DATA SHEET (CONSULT)
-
Ref. 08066 Membrana impermeabilitzant contínua d'emulsió acrílica-poliuretà flexible i elàstic, específica per a la impermeabilització horitzontal de balcons, terrasses, terrats i cobertes que seran pavimentats amb ceràmica o pedra. En cap cas no es pot deixar com a impermeabilització superior. Es recomana escampar sorra sobre l'última capa encara humida per crear una rugositat que faciliti la col·locació de l'adhesiu del paviment final.
FITXA TÈCNICA -
Ref. 08065
Aliphatic polyurethane waterproofing elastomer with acrylic emulsion. Water base. Single component Ideal for the continuous waterproofing of terraces, roofs, roofs, planters and concrete supports. Flexible, creates elastic membrane. 180% It maintains its mechanical properties of -15 oC and +70 oC. It is advisable to build with ARTIMAT structural geotextile based on polyester nappa, which unifies the two layers and improves the mechanical resistance to breakage and impact. Resistant to weathering and tiling. Anticarbonatation. Good adhesion to most supports. Unalterable with defrost cycles. Absorbs micro cracks less than 1 mm. Easy maintenance and repair. It allows to apply high thicknesses. It does not yellow. Resistant to standing water. Good resistance to pedestrian traffic. Satin finish. Possible brilliant finish by applying ARTIPUR COLORES or ARTIPUR SUELOS. Gray, Red. VOC 9.7g / l - 2.010 140g /
Certification of adhesion by direct traction, UNE-EN 1542: 1999, permeability to water vapor, UNE-EN ISO 7783: 2012, permeability to liquid water, UNE- EN 1062-3: 2008, permeability to carbon dioxide, UNE -eN 1062-6: 2003, of the watertightness to water. Method B s / n UNE EN 1928: 2000, of the variation of tensile properties (strength and elongation), UNE EN ISO 527-1 (2012) and UNE EN ISO 527-3 (1996) - AC (2002) after of artificial aging due to prolonged exposure to the combination of UV radiation, high temperature and water, UNE EN 1297: 2006.
TECHNICAL DATA SHEET (CONSULT) / DECLARATION OF CONFORMITY -
Ref. 08063 Capa segelladora sobre superfícies poroses, absorbents o irregulars. S’aplica com a preparació del PROCÉS ARTIPUR, tant en acabats en color com transparent. Evita micro fissures o petits esquarteraments homogeneïtzant l’absorció entre les juntes en els enrajolats, facilitant la formació de la pel·lícula elàstica amb els elastòmers ARTIPUR. En qualsevol suport i circumstància, per assegurar un bon ancoratge, es recomanable afegir un 1% d’ADITOR PU promotor d’adherència . COV 28g/l - 2010 30g/l
FITXA TÈCNICA -
Ref. 08063 Sealing layer on porous, absorbent or irregular surfaces. It is applied as preparation of the ARTIPUR PROCESS, both in color and transparent finishes. Avoid micro-cracks or small squabbles. it homogenises the absorption between the joints in the tiles and facilitates the formation of the elastic film with the ARTIPUR elastomers. In any support and circumstance, to ensure a good anchoring, it is advisable to add a 1% Aditor PU adhesion promoter. VOC 28g / l - 2010 30g / l
TECHNICAL DATA SHEET (CONSULT)
-
Ref. 08062 One component polyurethane waterproof elastomer. Less elastic than the other ARTIPUR, but totally flexible. Superior resistance to mechanical abrasion, can be used as TOP layer on the other membranes in the ARTIPUR PROCESS on floors, balconies, roofs, terraces and in general spaces with moderate traffic. Good resistance to chemical abrasion in spills of water, diluted acids and alkalis, oils and fats ... Washable. Excellent for painting exterior and interior pavements. On hard, vitrified or low porous surfaces, add Aditor PU (1%) promoter On poorly forged, porous or absorbent surfaces, apply a previous layer of ARTIPUR SELLADOR + Aditor PU. Colors on request gray, red and tile. VOC 3g / l - 2010 30g / l.
TECHNICAL DATA SHEET (CONSULT) -
Ref. 08064 EPolyurethane elastomer monocomponent waterproof, transparent and finishing. Excellent elasticity Stable to the sun's rays. It does not yellow. Resistant to stagnant industrial water (if ADITOR PU is added), dilute acids and alkalis, oils, fats, ... Very stable in its aging. It maintains its mechanical properties from -15oC to + 70oC. Leveling without pores, bubbles or irregularities. Passable. Temporarily facilitates the repair of cracked glass. Application on balconies, terraces, skylights, regeneration of PVC plates, methacrylate, polycarbonate, reinforced glazing. Protection of wood, vitrified fabrics, insulating polyurethane, artificial stone, natural. Easy use and maintenance. On hard, vitrified or slightly porous surfaces, add Aditor PU promoter (1%). VOC 50g / l - 2010 140g / l.
TECHNICAL DATA SHEET (CONSULT) -
Ref. 03063 Water-based polyurethane varnish for concrete, printed concrete, stone and wood. Sparkly. Flexible. Resistance to sunlight. Renovation of veneers, slate, natural and artificial stone, masonry .... Protection of dirt on elastomers such as ARTIGUM GEL FIX, does not present sticky touch or at high temperatures. On plastic paints to reinforce alkali resistance, moderate abrasion and pedestrian traffic. Highlight the appearance of the surfaces. Easy horizontal and vertical application. VOC 24g / l - 2010 130 g / l. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
TECHNICAL DATA SHEET (CONSULT)
-
Ref. 08029 Waterproof liquid elastomer in water base, for the creation of continuous waterproofing as the ARTIGUM, but contains in its composition loads of calcium carbonate that lower the cost and reduce their performance a little. Very useful in moderate and urban climates. Results very superior to others of the market that are presented as first quality. It does not lose its elasticity or resistance. It does not have tacking at high temperatures. Red and Gray It can be made fiber or microfibre and in other colors on request. VOC 7 g / L - 2010 140 g / L
TECHNICAL DATA SHEET (CONSULT)
-
Ref. 08024 Elastic and waterproof continuous pavement. Resistant to abrasion and wear. Passable. Very resistant to the exterior and extreme climates. Its elastic finish absorbs shock and silence, making it smooth to the step and resistant to structural movements without cracking. To reinforce the finish of the ARTIGUM PROCESS wherever there is a need for more resistance and aesthetics. Great durability Excellent as a continuous coating on sports floors, schools, playgrounds ... Very good adhesion to the supports. It can be left as finishing or sealing with elastic paints like ARTIGUM TOP, ARTIPUR SUELOS, among others. Very comfortable application when presented as plastic mass ready to use. Decorative finish. Red color, can be supplied in any color upon minimum order. VOC 2 g / L - 2010 140 g
TECHNICAL DATA SHEET (CONSULT)
-
Ref. 08121 Primer of the ARTIGUM PROCESS. Polymers saturated with moisture-reactive pigments. Essential on wet substrates (regulates adhesion and transpiration in the waterproofing process) and on porous ceramic surfaces and ceramics. Do not apply on vitrified surfaces, without opening the pore with ACIART or mechanically. Neutralizes moisture in plaster and cement. VOC 491g / l - 2,010 500g / l.
TECHNICAL DATA SHEET (CONSULT)
-
Ref. 07036 Smooth elastic waterproofing coating similar to ARTIGUM LISO, also with binder based on acrylic resins, but mixed with siloxanicas that give it a water-resistant and non-stick nature of the dirt, keeping the supports dry and clean. Very indicated in urban climates for its resistance to dirt. White and colors. COC 3g / l - 2010 140g / l. Certificate of anti-carbonation according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005
TECHNICAL DATA SHEET (CONSULT)
