-
Ref. 06164 Polyurethane fixative for disintegrated supports. Great hardness and tenacity. Recommended for dry, wet or dusty concretes. Consolidates and protects concrete pavements. Sealing layer in porous floors before applying the ARTIDUR-X 100 or ARTIDUR A2C finishing polyurethanes. Outdoors or exposure to sunlight do not use as a visible layer, yellow. It can be seen in places protected from sunlight, increasing the tone of the concrete. Apply in well-ventilated places. Restoration of exterior wood very aged, saturate before painting. VOC 550g / l - 2010 750g / l.
-
Ref. 08063 Capa segelladora sobre superfícies poroses, absorbents o irregulars. S’aplica com a preparació del PROCÉS ARTIPUR, tant en acabats en color com transparent. Evita micro fissures o petits esquarteraments homogeneïtzant l’absorció entre les juntes en els enrajolats, facilitant la formació de la pel·lícula elàstica amb els elastòmers ARTIPUR. En qualsevol suport i circumstància, per assegurar un bon ancoratge, es recomanable afegir un 1% d’ADITOR PU promotor d’adherència . COV 28g/l - 2010 30g/l
FITXA TÈCNICA / FULLA SEGURETAT -
Ref. 08063 Sealing layer on porous, absorbent or irregular surfaces. It is applied as preparation of the ARTIPUR PROCESS, both in color and transparent finishes. Avoid micro-cracks or small squabbles. it homogenises the absorption between the joints in the tiles and facilitates the formation of the elastic film with the ARTIPUR elastomers. In any support and circumstance, to ensure a good anchoring, it is advisable to add a 1% Aditor PU adhesion promoter. VOC 28g / l - 2010 30g / l
-
Ref. 07053 Consolidating fixative based on natural mineral silicates. Remineralizer of the stone. Extreme breathability Excellent for mixing with inorganic pigments and creating glazes and patinas. Do not use as a finishing coat for possible whitening problems, except when used as a pigmented glaze. Regulates the absorption of the subsequent finishes. Diluent of the ARTISIL mineral paint, to achieve the desired degree of opacity and to regulate the viscosity to adjust to the needs of the supports, which must always be minerals, stone, stucco, concrete ... VOC 5,5g / l - 2010 30g / l.
-
Ref. 01031 Acrylic fixative of great penetration. Hard and resistant. Seals old plastic paint, lime, tempera and degraded monolayers with microcracks. Slight increase in support tone Increase the performance of the finishes with plastic paints. Uniform absorptions and avoid color differences in the finishing layers. It comes in a very pure state. Dilution 1 p + 3-4 p. water by weight (according to absorption). Avoid the use application to avoid excess film. VOC 2g / l - 2010 30g / l.
-
Ref. 16031 Masilla de renovació polivalent en pols, d'interior, per a aplicació manual. Permet reomplir, renovar i allisar. FITXA TÈCNICA
-
Ref. 13031 Deep penetration fixator. Nanoparticles that act from the bottom of the porous materials until their surface consolidating action. Very breathable Substitutes acrylic copolymers in solvent. Dilution according to the state of disintegration of the support 1 p + 2-3 p water. Surfaces of aged paintings, plaster, cement, lime, brick, stone ... VOC 11g / l - 2010 30g / l
-
Ref. 13032 Coating and sealing of wood, fiber cement, plastic, tarpaulins .... Water base. Superior adhesion. Easy sanding Matte finish on walls. Ideal for repainting with enamels to water NEW TEC ESMALTE. VOC 40 g / l - 2,010 130g / l.
-
Ref. 06131 High penetration consolidating impregnation for all types of construction materials. Absorption sealer on dusty backgrounds. Homogenizer product of the supports, avoids differences of joints and color of the finishes. Excellent fixer of deteriorated monolayers, broken cement, cement or lime mortar or stucco, exposed brick, concrete. It can soften old acrylic paints badly adhered and fix those that are in good condition. Breathable Treat the bottom without saturating. It slightly increases the tone of the support. Ideal to finish with PLIOART, with which you can mix to create glazes or intermediate layers. VOC 742g / l - 2,010 750g / l.
-
Ref. 08121 Primer of the ARTIGUM PROCESS. Polymers saturated with moisture-reactive pigments. Essential on wet substrates (regulates adhesion and transpiration in the waterproofing process) and on porous ceramic surfaces and ceramics. Do not apply on vitrified surfaces, without opening the pore with ACIART or mechanically. Neutralizes moisture in plaster and cement. VOC 491g / l - 2,010 500g / l.
-
Ref. 01111 Preparation of plaster and wood. So white. It can be easily polished with fine sandpaper. For exteriors reinforce with ARTILUX enamel (3p. + 1p. ARTILUX). Consolidates "dead" plaster surfaces inconsistently. Special pladur and similar. No rebillos. VOC 305g / l - 2.010 350g / l.
-
Ref. 01112 Thixotropic monolayer anti-stain, based on solvent-based acrylic resins. White universal matte paste. Recommended to cover the yellowish spots of fats, nicotine, mold and moisture of the walls and ceilings. Very little odor during its application. Excellent sealer It can be left as a finishing or repainting with plastic paints or with enamels to water or solvent and even with ARTIDUR A 2C polyurethanes. Does not splash or pick up. VOC 330g / l - 2.010 350g / l.
