Interior and exterior decoration – Industrial protection – Page 2 – ARTIC

973 450 717|info@articsa.net

ARTICRIL SATIN

Ref. 04023 Satin plastic paint based on acrylic copolymers. Very noble to look with highly silky finish For interior and exterior decorations. Washable, resistant to wet rubbing, exceeding 8,000 double passes. Softness of an enamel, health benefits. Excellent for applications in medical centers, pharmacists, hospitals, schools ..., where low toxicity is required. Minimum maintenance Exteriors and facades in aggressive, industrial, marine, contaminated or humid environments. Anti-carbonation protection of concrete. Raincoat. Additivated with ADITOR PU (08 Complementos) is resistant to standing water. Resistant to mold. Easy application, high performance. Flexible. Excellent cover. White and colors. VOC 20g / l - 2010 100g / l Anticarbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005.
DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation) / CERTIFICATION (CE Marking)

Details
ACEITE DE TEKA

Ref. 12100 Compound formulated with natural oils. Ideal for the protection and renewal of woods, especially tropical and exotic. Interior and exterior. It restores its original appearance, offering resistance to UV rays and natural aging by exposure to the weather. Good penetration and wetting to the supports. Protection of dirt. Easy application Matte or satin finish according to the layers applied. It does not film. VOC 572 g / l - 2010 700 g / l.
DATA SHEET / SAFETY DATA SHEET

Details
BARNIZ INTEMPERIE

Ref. 03112 Synthetic monocomponent for aggressive environments. Hard and tenacious on wood. Excellent brochability and leveling. Easy application Resistance to exteriors with high humidity. It contains absorbers of UV rays that provide great resistance to sunlight. VOC 388-2010 400g / l.
DATA SHEET / SAFETY DATA SHEET

Details
BARTILAC

Ref. 03114 Same features as BARTILUX, but satin. Its finish makes it highly recommended for decorative finishes. VOC 388g / l - 2,010 400g / l.
DATA SHEET / SAFETY DATA SHEET

Details
BARTILUX

Ref. 03111 Synthetic glossy maximum protection for woods on the outside and inside. Long durability of its brightness and transparency. Its characteristics make it very economical in the long term compared to other conventional products. Easy application and excellent leveling. VOC 388g / l - 2,010 400g / l.
DATA SHEET / SAFETY DATA SHEET

Details
NEW TEC MADERA

Ref. 13016 Lasur outdoors. Integral protector of wood. As finishing in interiors and exteriors. Resistant to UV rays, water, pollution, atmospheric agents and mild household cleaning products. Waterproofing, water repellent. Micro porous: Let the wood breathe. Avoid bluing. It does not film or quarte. It does not present sticky touch or at high temperatures. Do not apply on wood without pores (tropical, varnished ...), or on wood in contact with permanent water. Micronized pigments of long duration. Highlight the original grain. Matt and satin finish according to the number of layers. Colorless and COLOR CHART. VOC 30 g / l-2010 100g / l. It can also be used as a background to color and finish with all types of water or solvent based varnishes, such as those described below.
DATA SHEET / SAFETY DATA SHEET

Details
FERROART

Ref. 02126 Forge effect metallic enamel with anticorrosive properties. Direct application to iron without the need for prior priming (priming with ANTIOXIDANTE PREART will reinforce the anticorrosive performance). Decoration and protection of any iron surface (lampposts, railings, bars, metal doors ...). Excellent adhesion, elasticity and resistance to the weather. High resistance to shock and abrasion. Highly decorative COLOR CHART. VOC 292 g / l - 2010 300 g / l
DATA SHEET / SAFETY DATA SHEET

Details
NEW TEC ESMALTE MATE

Ref. 13018 Same features as NEW TEC ESMALTE, but mate. Apply on well sealed surfaces and in thin layers. White and colors. VOC 60g / l - 2010 130g / l.
DATA SHEET / SAFETY DATA SHEET

Details
NEW TEC ESMALTE SATIN

Ref. 13017 Same features as NEW TEC ESMALTE, but satin. Its finish makes it very suitable in all types of decorations of high aesthetic quality. Furniture, walls in hotels, shops, shopping centers, shelves ... and spaces in general where a good mechanical and chemical resistance is required with a highly decorative finish. Excellent leveling Lacquered spray finish. Apply on well sealed surfaces and in thin layers. White and colors. VOC 60g / l - 2010 130g / l.
DATA SHEET / SAFETY DATA SHEET

Details
NEW TEC ESMALTE BRILLANTE

Ref. 13015 Aqueous acrylic enamel, mono component, polyvalent and bright. Absence of odors during application. For protection and decoration both indoors and outdoors in wooden, iron, metal, plastics, plaster, concrete, plasterboard ... Given the large number of applications see technical sheet to decide your primer according to support or needs. Easy maintenance, it is resistant to beverages, food and domestic cleaning liquids. Highly decorative and sanitary finishes. Excellent for applications in medical centers, pharmacies, hospitals, schools ..., where low toxicity and low cov. Easy application, extensibility and brochability. Excellent leveling It does not yellow. Apply on well sealed surfaces and in thin layers. Avoid unnecessary thicknesses. White and colors. VOC 60g / l - 2010 130g / l.
DATA SHEET / SAFETY DATA SHEET

Details
ARTILUX AO MATE

Ref. 02118 Matte synthetic antioxidant enamel. Same features as ARTILUX AO, but matte finish. White and colors on request. VOC 330 g / l - 2010 500 g / l.
DATA SHEET / SAFETY DATA SHEET

Details
ARTILAC AO

Ref. 02117 Synthetic satin antioxidant enamel. Same features as ARTILUX AO, but satin. Its finish makes it very suitable in all types of decorations of high aesthetic quality. Furniture and spaces in general where a good mechanical and chemical resistance is required with a highly decorative finish. Lacquered spray finish. White, black and colors. VOC 345 g / l - 2010 500 g / l.
DATA SHEET / SAFETY DATA SHEET

Details
ARTILUX AO

Ref. 02115 Bright synthetic antioxidant enamel. Suitable for application on wood and iron both for protection and interior and exterior decoration. With anticorrosive additives, possible direct application on iron, provided it is in clean supports and without rust. Priming with ANTIOXIDANTE PREART will reinforce the anticorrosive performance. Excellent cover and very good brochability. Great hardness Flexible. Optimal drying To paint machinery, garden furniture, railings, industrial facilities, furniture for everyday use such as tables, chairs, kitchen furniture ... Given the large number of applications, consult technical sheet to decide your primer according to support or needs. White, black and colors VOC 368 g / l - 2010 500 g / l.
DATA SHEET / SAFETY DATA SHEET

Details
ARTIDUR A-2C SATIN

Ref. 02162 Satin bi-component aliphatic polyurethane. Same features as ARTIDUR A2C, but satin finish, spray lacquered. White and colors.
DATA SHEET (no available) / SAFETY DATA SHEET

Details
ARTIDUR A-2C

Ref. 02161 Two component bright aliphatic polyurethane. Direct anchoring on surfaces without pores, metals (aluminum, galvanized, stainless steel, copper, ...), plastics (PVC, methacrylate, polycarbonate ...), ceramics, etc. Great iron protector prepared with anticorrosive primers like ARTIDUR GALVÁNICO or NEW TEC ARTIPOX 2C. Very flexible, it resists blows. Slow aging and long duration. Industrial protection and marine and extreme environments, with excellent behavior against sunrays, acid rain and extreme temperatures. Ideal on machinery, facades of sheet metal, furniture ... Very resistant to mechanical abrasion, interior and exterior pavements of moderate traffic. Good resistance to chemical aggressions and standing water. Highly decorative finish, lacquered application with short hair roller and airless. White, black and permanent colors. VOC 380g / l - 2,010 500g / l. UNE 48274: 2003 Certification in Gloss, Abrasion resistance (Taber), flexibility, hardness (Persoz), traction adhesion, stagnant water resistance, alkalis and acids, UV slits, and protection against slippage according to UNE-ENV 12633: 2003
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (B) / CERTIFICATIONS

Details
PREARTIGUM

Ref. 08121 Primer of the ARTIGUM PROCESS. Polymers saturated with moisture-reactive pigments. Essential on wet substrates (regulates adhesion and transpiration in the waterproofing process) and on porous ceramic surfaces and ceramics. Do not apply on vitrified surfaces, without opening the pore with ACIART or mechanically. Neutralizes moisture in plaster and cement. VOC 491g / l - 2,010 500g / l.
DATA SHEET / SAFETY DATA SHEET

Details
ARTISIL IMPREGNACIÓN

Ref. 07053 Consolidating fixative based on natural mineral silicates. Remineralizer of the stone. Extreme breathability Excellent for mixing with inorganic pigments and creating glazes and patinas. Do not use as a finishing coat for possible whitening problems, except when used as a pigmented glaze. Regulates the absorption of the subsequent finishes. Diluent of the ARTISIL mineral paint, to achieve the desired degree of opacity and to regulate the viscosity to adjust to the needs of the supports, which must always be minerals, stone, stucco, concrete ... VOC 5,5g / l - 2010 30g / l.
DATA SHEET / SAFETY DATA SHEET

Details
TIXOART W

Ref. 01015 Thixotropic monolayer to water. Isolation of smoke stains, grease, mold, fruit juices, markers, drinks, nicotine, residual moisture. On old plastic and synthetic paintings aged and yellowed. In highly contaminated surfaces it is used as a primer for plastic paints and enamels, preferably in water, NEW TEC ESMALTE. High coverage power. No bleeding when applied to tar and bituminous surfaces. No odors or contamination during the application can be used in kitchens, bars, restaurants, food in operation ... Resistant to mold. It can be left as finished. White permanent and matt snow. VOC 35g / l - 2010 40g / l.
DATA SHEET / SAFETY DATA SHEET

Details
TIXOART INOLORA

Ref. 01112 Thixotropic monolayer anti-stain, based on solvent-based acrylic resins. White universal matte paste. Recommended to cover the yellowish spots of fats, nicotine, mold and moisture of the walls and ceilings. Very little odor during its application. Excellent sealer It can be left as a finishing or repainting with plastic paints or with enamels to water or solvent and even with ARTIDUR A 2C polyurethanes. Does not splash or pick up. VOC 330g / l - 2.010 350g / l.
DATA SHEET / SAFETY DATA SHEET

Details
NEW TEC SELLADORA

Ref. 13032 Coating and sealing of wood, fiber cement, plastic, tarpaulins .... Water base. Superior adhesion. Easy sanding Matte finish on walls. Ideal for repainting with enamels to water NEW TEC ESMALTE. VOC 40 g / l - 2,010 130g / l.
DATA SHEET/ SAFETY DATA SHEET

Details
SELLADORA PREART

Ref. 01111 Preparation of plaster and wood. So white. It can be easily polished with fine sandpaper. For exteriors reinforce with ARTILUX enamel (3p. + 1p. ARTILUX). Consolidates "dead" plaster surfaces inconsistently. Special pladur and similar. No rebillos. VOC 305g / l - 2.010 350g / l.
DATA SHEET / SAFETY DATA SHEET

Details
EPOCRIL FH-3C

Ref. 08051 Epoxy primer for wet or dry cement surfaces prior to coating. Three components Great adhesion (also reinforced iron). Protection against humidity. Breathable Filling together. Interior / exterior waterproofing. Unventilated enclosures: pits, galleries, tunnels, basements, floors ... Repaintable with mono and bi-component paints. Essential in floors with residual humidity. Ivory color. Under minimum order, consult.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)

Details
ARTIDUR GALVÁNICO GRIS

Ref. 12168 High hardness antioxidant based on micronized zinc powder. Cold galvanization of iron. Extraordinary adhesion on any deoxidized metal surface. It is advisable to recoat with ARTIDUR A 2C polyurethanes within 20 hours. It forms an extremely durable system (more than 20 years depending on the environment). Maximum resistance to steel corrosion. To protect iron armors that will be covered with mortars or concrete. VOC 315g / l - 2.010 350g / l. https://www.articsa.net/wp-content/uploads/2021/03/FTA-ArtidurGalvanicoGris-12168-2012-ISO_en.pdf/ https://www.articsa.net/wp-content/uploads/2021/03/MSDS-ARTIDUR-GALVANICO-GRIS-Eng.pdf

Details
ARTIPOX FA-2C

Ref. 12512 Anti-corrosive primer for irons, solvent based. Bi-component. Bonding bridge, with excellent adhesion for non-ferrous metals, galvanized, stainless steel, aluminum, copper, light alloys, ... Resists aggressive environments and abrasion. Recommended repaint with ARTIDUR A-2C. It replaces with advantages when Wash first. White color VOC 485g / l - 2,010 500g / l.
DATA SHEET (no available) / SAFETY DATA SHEET (no available)

Details

Title

LOGOS_25_ARTIC_EXPERTS_PINTURES_page-0001-removebg-preview

We are pleased to inform you that Artic has new certifications:

SUBSCRIBE AND RECEIVE ALL THE NEWS

YOU CAN FIND US

ARTIC S.A. 51-73 Gerb Road, 25600 Balaguer – Lleida
Customer service: 973 450 717
info@articsa.net
Legal note
Privacy policy
Cookies policy
Complaints channel