-
Ref. 10588 Cementitious waterproofing mortar of high thickness, flexible and with some elasticity. Two components It allows waterproofing supports with movements and expansions, both horizontal and vertical (does not hang). Resistant to contact with permanent water in terraces, planters, fountains, tunnels, tanks, swimming pools, wells, irrigation channels, gutters, insulating materials, flexible elements, walls, water tables .... Absorbs and seals cracks less than 1 mm. Compatible with other ARTIGUM and ARTIPUR elastomers. It has characteristics that help protect against carbonation. Resistant to weathering and tiling. Breathable to water vapor.
-
Ref. 10592 Continuous powder coating on the basis of high performance hydraulic micro cement. Based on calcium cements and marble powder of different granulometries, it is presented in two modes FINE and THICK. It is used for the realization of highly decorative continuous coatings, both vertical and horizontal. Direct adherence on any type of material. Very hard and tenacious. Apply ARTIPUR SELLADOR as a primer and between layers, it will provide a better homogenization of the absorptions, and in supports with different materials (tiling, ceramics ...) a better regularization. It is advisable to seal with NEW TEC BARNIZ varnish or on floors or in continuous immersion BARTIDUR A-2C. Low thermal diffusion Antistatic Kitchens, toilets, workshops, restaurants, hotels, shops ... interior and exterior decorations. White color. Easily colorable.
-
Ref. 10593 Self-expanding mortar for leveling and screwing pavements. With hydraulic binders. For the creation of continuous pavements. High mechanical strength with minimum thickness, from 1 mm to 1 cm (in two layers), recommended between 2-4 mm. Dilution approx. 25 Kg + 7 liters (1 part ARTICRIL RESIN 6 + 3 parts of water). Prime the support and between layers with the same dilution mixture. Resistant to water, to acid, alkaline and disinfectant detergents. Accepts finished with paints and varnishes mono and bi-components, epoxy, acrylics, polyurethanes, chlorinated rubber ... Check the times in each case. For the renovation of cement and absorbent concrete pavements, in all types of parking, premises and industries. Spread with notched trowel and deaerate with barbed roller. Excellent leveling, satin finish. Gray. Other colors under a minimum order of 600 kg.
-
Ref. 11534 Self-leveling epoxy coating 100% solids. Solvent-free and odorless. Two components Mixed with aggregates (see FT) a colored mortar is obtained for the creation of continuous pavements of high aesthetic quality and high performance. As an intermediate leveling layer. Good chemical resistance Apply on absorbent, clean and dry substrates. Prime with ARTIPOX BV 2C to consolidate and regulate absorptions. Recommended thickness 2-4 mm. Before application, multi-layer processes (ARTIPOX RESIN 2C + aggregates) can be used to regulate floor imperfections. Distribute with notched trowel or rubber lip and pass the barbed roller for leveling and deaerating to avoid bubbles. Maintains the volume after drying, does not reflow. It can also be used without aggregates as paint. Smooth or anti-slip finishes with epoxies or polyurethanes from PAVEMENTS FINISH PAINTS section. Standard colors Red, Gray and Green. Other colors on request for factory production or dry cleaning. VOC 66G / l - 2010 500g / l.
-
Ref. 11532 Self-leveling epoxy varnish 100% solids. Similar characteristics to ARTIPOX AN 2C, but transparent. Finishing of the multilayer process with colored quartz. Maintains the volume after drying, does not reflow. Possibility of anti-slip finishes. Vertical and horizontal varnishing. On epoxy paints, it improves the fineness and leveling. At a minimum order of 100Kg (CompA). VOC 80g / l-2010 500g / l.
-
Ref. 19592 Bicomponent epoxy filler. Especially indicated for the creation of half rods between vertical and horizontal vertical walls. Without detachment or retraction. It avoids the contamination in joints and zones of infection by accumulation of dirt and residues attacked by microorganisms. For the caulking of cracks. Fast painted. In active joints it is advisable to assemble with grid squared. VOC Not applicable.
-
Ref. 11531 100% solids multilayer epoxy impregnation. Two components Resin sealing of the support and filling base with aggregates and quartz. Solvent free. Waterproof concrete. Thickness between 2 and 5 mm. Joints between vertical and horizontal surfaces. To create continuous pavements without joints. In multilayer processes with quartz color sowing it is ideal to finish with self-leveling transparent coatings 100% solid ARTIPOX GLASS. In multilayer processes with non-colored aggregates, smooth, non-slip and anti-skid finishes can be obtained, of different grades according to granulometry. It can be enhanced with the ARTIPOX AN 2C self-leveling. It can be sealed by painting or varnishing with the bi-component products described in the PAVEMENTS PAINTINGS section. Resists abrasion and heavy traffic, industrial buildings, loading docks, ramps, slaughterhouses, fish markets, cold rooms, industrial kitchens, warehouses, chemical cleaning and disinfection treatments ... Dilute it to prime the concrete or use ARTIPOX BV 2C . VOC 16g / l - 2010 500g / l.
DATA SHEET / SAFETY DATA SHEET (A) / SAFETY DATA SHEET (B) -
Ref. 08052 Cementitious epoxy flooring self-extensible to water. Repair and renovation of floors of all types and uses. Warehouses, industries, pits, galleries, tunnels, basements ... Ideal in poorly ventilated places is completely non-toxic and odorless. Resistant to moisture from both the substrate and the environment. Excellent mechanical and chemical resistance. Soils that are not very consistent, disintegrated and / or wet, prime with EPOCRIL FH-3C. It can be repainted quickly (see the times) with paints and varnishes of mono and bi-component finish, epoxy, acrylics, polyurethanes, chlorinated rubber .... But it is highly recommended to apply epoxy to water NEW TEC SUELOS 2C. Maximum dilution 7 lt water in a kit (three components) of 55.5Kg. Color White beige garlic minimum order, consult. VOC 8g / l - 2010 500g / l.
-
Ref. 08024 Elastic and waterproof continuous pavement. Resistant to abrasion and wear. Passable. Very resistant to the exterior and extreme climates. Its elastic finish absorbs shock and silence, making it smooth to the step and resistant to structural movements without cracking. To reinforce the finish of the ARTIGUM PROCESS wherever there is a need for more resistance and aesthetics. Great durability Excellent as a continuous coating on sports floors, schools, playgrounds ... Very good adhesion to the supports. It can be left as finishing or sealing with elastic paints like ARTIGUM TOP, ARTIPUR SUELOS, among others. Very comfortable application when presented as plastic mass ready to use. Decorative finish. Red color, can be supplied in any color upon minimum order. VOC 2 g / L - 2010 140 g
