-
Ref. 10095 Liquid mixing and kneading. To color the MIX 5 homogeneously. It avoids color differences in the dyeing and during setting. Reproducible colors With pigments resistant to alkalinity. Tinting of monolayers. Check colors VOC 1g / l - 2010 30g / l.
-
Ref. 06134 Hydrophobic consolidating impregnation for porous materials. Creates surface film integrated in the support. With high penetration, it seals the pores, hardening the dusty supports, brick, face, concrete, mortars, old lime stuccos ... Suitable for limestones, sandstones and granites. When necessary a waterproof finish is not invisible. Transparent finish with slight tone, which increases as successive layers are applied. Accepts pigmentation to make glazes. Waterproof and with superficial perspiration. 741 g / L - 2010 750 g / L Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 06181 Consolidating and hydrophobic cortical impregnation in solvent base. To stop finishing, but can be repainted with solvent paints. For stones, concrete and stuccos. Great penetrating power. High values of resistance to diffusion for a better protection against carbonation and a lower resistance to diffusion of water vapor, breathable. Saturate until homogenization of the support. Apply from the bottom up. Wet layer on wet. Colorless, slightly increases the tone of the support, without filmifying. VOC 742g / l - 2,010 750g / l.
-
Ref. 06182 Consolidating in depth prior to restoration. Based on water-based colloidal silica dispersion. High penetration and non-water repellent. Fixing of supports before their screed with mortars or stuccos. Do not use as a final layer, it could react whitening. To consolidate natural stones of all kinds, acidic or basic. Neutralizes the acidity caused by carbonation. Consolidates the aged concrete and recovers the original consistency. It does not need as long to cure as Silicato de Etilo. Apply from the bottom up. VOC 1g / l - 2010 30g / l.
-
Ref. 01031 Acrylic fixative of great penetration. Hard and resistant. Seals old plastic paint, lime, tempera and degraded monolayers with microcracks. Slight increase in support tone Increase the performance of the finishes with plastic paints. Uniform absorptions and avoid color differences in the finishing layers. It comes in a very pure state. Dilution 1 p + 3-4 p. water by weight (according to absorption). Avoid the use application to avoid excess film. VOC 2g / l - 2010 30g / l.
-
Ref. 06141 Water repellent based on modified polysiloxanes. Long duration, over 10 years. Invisible, it does not modify the background tone. For exposed work, bricks, stone, stuccos ... in any climate. Also for textiles, wood and non-cracked porous materials. Microporous, does not form superficial film. Great water-repellent capacity and high perspiration. Resistant to mold. It prevents the formation of salts and does not green with time. Self-cleaning, keeps the surface clean, hindering the adherence of dust and dirt. Do not dilute, apply to saturation in two layers from bottom to top crossed wet on wet. The immersion treatment is also possible. VOC 748g / l - 2,010 750g / l.
-
Ref. Sanitizing matte plastic paint for exterior and interior use. Thanks to the new silver ion technology, it is resistant to bacteria and fungi, protecting and cleaning the applied surfaces. Almost odorless and with highly decorative features, such as resistance to wet rubbing, covering and performance. Excellent results. Suitable for any construction support but thanks to its sanitizing nature, it is especially suitable for hospitals, residences, schools, hotels and homes in general. VOC <1 g / L - 2010 30 g / L.
SECURITY SHEET -
Ref. 13035 Water-based one-component varnish for the protection of floors and decoration of the ARTIMIX 20 micro cement or similar porous supports (stone, mortar, printed concrete, brick, wood ...). Indoor and outdoor use. Shiny finish. Excellent wetting and consolidation of the support, blocking possible efflorescence. It can be applied as the first coat of the BARTIDUR A2C to minimize the usual increase of tone of the varnishes to the solvent. Easy horizontal and vertical application. Resistance to moderate abrasion and pedestrian traffic. COV 50- 2010 140g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET -
Ref. 13031 Deep penetration fixator. Nanoparticles that act from the bottom of the porous materials until their surface consolidating action. Very breathable Substitutes acrylic copolymers in solvent. Dilution according to the state of disintegration of the support 1 p + 2-3 p water. Surfaces of aged paintings, plaster, cement, lime, brick, stone ... VOC 11g / l - 2010 30g / l
-
Ref. 06042 Siloxane water repellent with water-based nanoparticles for mineral supports. Excellent penetration Invisible. It does not film and does not modify the appearance of the support. Microporous, waterproof and transpires water vapor. Self-cleaning, keeps the surface clean and free of dust and dirt. Avoid the formation of salts. Resistant to mold. Ideal for facades of exposed work stuccos, fiber cement, natural stone, etc. In the application on paints and coatings to water or solvent, reinforces the hydrophobic performance. VOC 1- 2010 30g / l.
-
Ref. 06048 Water repellent and sealant for porous and absorbent surfaces. Excellent penetration Glossy finish. Compatible with alkaline and cementitious supports. Interior and exterior. It does not yellow. Avoid the adherence of dust and dirt. It is micro porous and allows the support to breathe. It prevents the formation of salts and the growth of fungi. Long-term treatment 3 g / l - 2010 30 g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 06046 Water-repellent and water-repellent, based on fluorinated acrylic resins. It does not form a film. Destined to the protection of porous materials against the penetration of oils, fats, lubricants ... on surfaces such as tiles, reconstructed stones, marble, concrete, cement, natural stones, etc. Pearl effect. Without smell. It does not increase the tone of the support, it is invisible. VOC 10 g / L - 2.010 30g / L.
