-
Ref. 07022 Anti-painted and anti-posters. Not permanent For all types of porous surfaces. Dilutable with water Creates protective film that is removed with alkalized water and ammonia, under pressure. Graffiti is removed with soap and water. Maximum economy and effectiveness for urban maintenance in towns and cities. Always apply on clean and dry surfaces. Ecological. It can also act as a release agent for concrete in molds made of wood, cement, plaster, plastic. VOC 6g / l - 2010 30g / l.
-
Ref. 07041 Long lasting polysiloxane in aqueous base for facades and monuments. With great performance, resulting in a very thin layer integrated into the support. To obtain colored impregnations in porous materials. Completely waterproof, with a waterproof character, it respects the transpiration of materials, stone, concrete, lime ... It provides unification of the funds, preserving the original texture. No possibility of cracking when aging. Protector against carbonation. High resistance to alkalinity, fungi, sunlight, high condensation and aggressive environments in general. It prevents dust adhesion and is self-cleaning. Impeccable matte finish without splicing or reworking. It is produced to achieve opaque finishes or glazes. White and colors. VOC 4g / l - 2010 - 40g / l.
-
Ref. 13016
Water paint based on pliolite resins. Ideal for facades and interiors where you have to let the walls breathe and maintain an aesthetic finish. It is microporous, being highly breathable to water vapor. With water-resistant character. Resistance to atmospheric agents. Very good adhesion and integration to the supports. Car washable with rain. Resistance to mold and alkalinity. Very good cover and easy application. Prime on porous substrates with the consolidating fixative of NEW TEC FIJO nanoparticles, with deep penetration or with ARTISIL impregnation. Application without odors Permanent white, not yellow and colors. VOC 5- 2010 40g / l.
UNE-EN 1542 certificate (traction adhesion) and UNE-EN ISO 7783 (water vapor permeability)
-
Ref. 07132 Pleated paint based on acrylic resins cauchadas. Excellent coating for facades, with great resistance to aging, 15 years per layer even in extreme or aggressive climates, and without gaining thickness, facilitating tasks in future rehabilitation. Its particles in the different layers are interlinked, creating a microporous coating that allows the supports to breathe. Vertical waterproofing. Self-cleaning with rain water. Excellent adhesion and integration to the support. Resistance to mold and alkalinity. Protection against carbonation. It allows to apply in low temperatures. Ideal for priming with PLIOART IMPREGNACIÓN, with which you can mix to create glazes or intermediate layers. Respects the original textures a lot. White and totally uniform colors, without alterations in joints and recesses. VOC 428g / l - 2,010 430g / l.
-
Ref. 03063 Water-based polyurethane varnish for concrete, printed concrete, stone and wood. Sparkly. Flexible. Resistance to sunlight. Renovation of veneers, slate, natural and artificial stone, masonry .... Protection of dirt on elastomers such as ARTIGUM GEL FIX, does not present sticky touch or at high temperatures. On plastic paints to reinforce alkali resistance, moderate abrasion and pedestrian traffic. Highlight the appearance of the surfaces. Easy horizontal and vertical application. VOC 24g / l - 2010 130 g / l. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 13035 Two-component glossy aliphatic polyurethane varnish. Exterior Interior. Excellent tenacity High chemical resistance, mechanical resistance and sunlight. Special for concrete floors, protection of absorbent marble, polyester resins (boats), wood in extreme environments. To protect ARTIMIX-20 MICROCEMENTO in workplaces and pavements. When high mechanical and chemical resistance is required. Available in satin and matt finish. On porous supports seal with a first coat of gloss. VOC 398g / l - 2,010 400 g / l. UNE-ENV 12633: 2003 Slip resistance. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 13035 Water-based one-component varnish for the protection of floors and decoration of the ARTIMIX 20 micro cement or similar porous supports (stone, mortar, printed concrete, brick, wood ...). Indoor and outdoor use. Shiny finish. Excellent wetting and consolidation of the support, blocking possible efflorescence. It can be applied as the first coat of the BARTIDUR A2C to minimize the usual increase of tone of the varnishes to the solvent. Easy horizontal and vertical application. Resistance to moderate abrasion and pedestrian traffic. COV 50- 2010 140g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET -
Ref. 06048 Water repellent and sealant for porous and absorbent surfaces. Excellent penetration Glossy finish. Compatible with alkaline and cementitious supports. Interior and exterior. It does not yellow. Avoid the adherence of dust and dirt. It is micro porous and allows the support to breathe. It prevents the formation of salts and the growth of fungi. Long-term treatment 3 g / l - 2010 30 g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 06132 Consolidating and water repellent impregnation varnish. Solvent base. Creates a film inferior to conventional varnishes. Very penetrating, hardens and seals any construction material. Special for exposed work, concrete and broken stone. When necessary a waterproof finish is not invisible. Increase the tone of the support. Apply only on porous surfaces. A layer allows satin finish, successive layers can increase it to bright. Accept pigmentation. Waterproof and breathable superficially to water vapor. VOC 672g / l - 2,010 750g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 06134 Hydrophobic consolidating impregnation for porous materials. Creates surface film integrated in the support. With high penetration, it seals the pores, hardening the dusty supports, brick, face, concrete, mortars, old lime stuccos ... Suitable for limestones, sandstones and granites. When necessary a waterproof finish is not invisible. Transparent finish with slight tone, which increases as successive layers are applied. Accepts pigmentation to make glazes. Waterproof and with superficial perspiration. 741 g / L - 2010 750 g / L Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 06046 Water-repellent and water-repellent, based on fluorinated acrylic resins. It does not form a film. Destined to the protection of porous materials against the penetration of oils, fats, lubricants ... on surfaces such as tiles, reconstructed stones, marble, concrete, cement, natural stones, etc. Pearl effect. Without smell. It does not increase the tone of the support, it is invisible. VOC 10 g / L - 2.010 30g / L.
-
Ref. 06181 Consolidating and hydrophobic cortical impregnation in solvent base. To stop finishing, but can be repainted with solvent paints. For stones, concrete and stuccos. Great penetrating power. High values of resistance to diffusion for a better protection against carbonation and a lower resistance to diffusion of water vapor, breathable. Saturate until homogenization of the support. Apply from the bottom up. Wet layer on wet. Colorless, slightly increases the tone of the support, without filmifying. VOC 742g / l - 2,010 750g / l.
