DATA SHEET / SAFETY DATA SHEET Consult for passivation of the BLINDOX iron in anticorrosive primers to protect it before increasing in 02 Preparations and primers.
-
Ref. 10031 Reactive polyvalent resin in high concentration aqueous solution. Hydraulic mortar improver, acts as an elasticizer, avoiding its tendency to crack and the formation of fissures. Plasticizes the mortars, avoiding retractions, improving fluidization in them and providing them with greater resistance to compression and abrasion. Bridge of union between old and new mortars, stuccos or mortars, improving their adherence. Sprinkle with cement between coats ... Dilution 1/3 water. VOC 1g / l - 2010 30g / l.
DATA SHEET / SAFETY DATA SHEET -
Ref. 10592 Continuous powder coating on the basis of high performance hydraulic micro cement. Based on calcium cements and marble powder of different granulometries, it is presented in two modes FINE and THICK. It is used for the realization of highly decorative continuous coatings, both vertical and horizontal. Direct adherence on any type of material. Very hard and tenacious. Apply ARTIPUR SELLADOR as a primer and between layers, it will provide a better homogenization of the absorptions, and in supports with different materials (tiling, ceramics ...) a better regularization. It is advisable to seal with NEW TEC BARNIZ varnish or on floors or in continuous immersion BARTIDUR A-2C. Low thermal diffusion Antistatic Kitchens, toilets, workshops, restaurants, hotels, shops ... interior and exterior decorations. White color. Easily colorable.
-
Ref. 10594 Cellular restoration mortar. Recovery and creation of volumes. Very light. Composed in its interior with hollow natural mineral particles, which crystallize in their interior the salts and caleos of the supports, gaining hardness with the years. No cracking or shrinkage at temperatures from -15oC to + 80oC. Extraordinary resistance to slow compression of buildings. Ideal for rehabilitation work and creation of new environments and interior and exterior decorations. Its touch and finish are natural. Its drying is very controlled, allowing a huge variety of work techniques. Repair and creation of stones and stuccos, chairs, graffiti, exposed work, ... It is sculptable and moldable. You can work in molds. Product of unbeatable specific qualities, is present in many renovations and restorations of facades and monuments around the world. Fronts of balconies, edges, moldings, screeds ... It weighs less and works better than other recommended mortars. Used in archeology to redo volumes in findings of stones, ceramics ... in pitchers, walls, houses ... Desalination of ancient walls in monumental restoration. It can be used in thinner and diluted layers, even by brush, roller or platen. It admits aggregates to equalize textures. It is advisable to waterproof with HIDROFUART BIO or NEW TEC HIDROFUART W, or protect with ARTISIL mineral coating, or with other breathable paints. Color Gray, is also available in White ARTIMIX 4-BL 10595. Dilution approx 15 Kg + 8 liters (1 part ARTICRIL RESIN 6 + 3 parts of water). It is advisable to prime the support and between layers with the same mixture. It can be diluted with BASE ARTIMIX 4 to color. Check colors Upon request, production of dry-colored mortar, in the factory.
-
Ref. 10596 Mixed air lime mortar with special aggregates and modifying additives. To cover new facades or for the rehabilitation of old ones. Textured finish. Concrete repair High resistance and stability to acid rain and pollution in urban environments and the demands of extreme climates. Repair of structures and load walls in poor condition when thickness and strength are required. No retractions. Thick layer: 20 mm. You can get a wide variety of classic stucco finishes, present in our facades and with easy application. Working layers of different colors and with traditional tools you get beautiful sgraffito. It can be finished with a wide variety of coatings, consolidants and / or water repellents. Dilution approx 25 Kg + 7 liters (1 part ARTICRIL RESIN 6 + 3/4 parts of water). It is advisable to prime the support and between layers with the same mixture. White color. It can be diluted with ARTIMIX 5 BASE to color, see colors. On request, production of dry-colored mortar in the factory.
-
Ref. 10094 Liquid mixing and kneading. To color the MIX 4 evenly. It avoids color differences in the dyeing and during setting. Reproducible colors With pigments resistant to alkalinity. Tinting of monolayers. Check colors VOC 1g / l - 2010 30g / l.
-
Ref. 10095 Liquid mixing and kneading. To color the MIX 5 homogeneously. It avoids color differences in the dyeing and during setting. Reproducible colors With pigments resistant to alkalinity. Tinting of monolayers. Check colors VOC 1g / l - 2010 30g / l.
-
Ref. 10032 Resin in aqueous dispersion for connecting bridges between concretes or mortars. Adhesive of insulating materials, plasterboard, partitions, pillars, textiles, polystyrene, etc ... For indoor and outdoor protected applications, vertical and horizontal. With delayed crosslinking, it allows to maintain the adhesion 3-4 days of its application. It does not lose benefits even at 0ºC. Compatible with supports with residual moisture, it is permeable to water vapor. Do not apply as a final layer of protection. VOC 1g / l - 2010 30g / l.
