-
Ref. 12100 Compound formulated with natural oils. Ideal for the protection and renewal of woods, especially tropical and exotic. Interior and exterior. It restores its original appearance, offering resistance to UV rays and natural aging by exposure to the weather. Good penetration and wetting to the supports. Protection of dirt. Easy application Matte or satin finish according to the layers applied. It does not film. VOC 572 g / l - 2010 700 g / l.
-
Ref. 03112 Synthetic monocomponent for aggressive environments. Hard and tenacious on wood. Excellent brochability and leveling. Easy application Resistance to exteriors with high humidity. It contains absorbers of UV rays that provide great resistance to sunlight. VOC 388-2010 400g / l.
-
Ref. 03063 Water-based polyurethane varnish for concrete, printed concrete, stone and wood. Sparkly. Flexible. Resistance to sunlight. Renovation of veneers, slate, natural and artificial stone, masonry .... Protection of dirt on elastomers such as ARTIGUM GEL FIX, does not present sticky touch or at high temperatures. On plastic paints to reinforce alkali resistance, moderate abrasion and pedestrian traffic. Highlight the appearance of the surfaces. Easy horizontal and vertical application. VOC 24g / l - 2010 130 g / l. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 13035 Two-component glossy aliphatic polyurethane varnish. Exterior Interior. Excellent tenacity High chemical resistance, mechanical resistance and sunlight. Special for concrete floors, protection of absorbent marble, polyester resins (boats), wood in extreme environments. To protect ARTIMIX-20 MICROCEMENTO in workplaces and pavements. When high mechanical and chemical resistance is required. Available in satin and matt finish. On porous supports seal with a first coat of gloss. VOC 398g / l - 2,010 400 g / l. UNE-ENV 12633: 2003 Slip resistance. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 03114 Same features as BARTILUX, but satin. Its finish makes it highly recommended for decorative finishes. VOC 388g / l - 2,010 400g / l.
-
Ref. 03111 Synthetic glossy maximum protection for woods on the outside and inside. Long durability of its brightness and transparency. Its characteristics make it very economical in the long term compared to other conventional products. Easy application and excellent leveling. VOC 388g / l - 2,010 400g / l.
-
Ref. 13035 Water-based one-component varnish for the protection of floors and decoration of the ARTIMIX 20 micro cement or similar porous supports (stone, mortar, printed concrete, brick, wood ...). Indoor and outdoor use. Shiny finish. Excellent wetting and consolidation of the support, blocking possible efflorescence. It can be applied as the first coat of the BARTIDUR A2C to minimize the usual increase of tone of the varnishes to the solvent. Easy horizontal and vertical application. Resistance to moderate abrasion and pedestrian traffic. COV 50- 2010 140g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET -
Ref. 13016 Lasur outdoors. Integral protector of wood. As finishing in interiors and exteriors. Resistant to UV rays, water, pollution, atmospheric agents and mild household cleaning products. Waterproofing, water repellent. Micro porous: Let the wood breathe. Avoid bluing. It does not film or quarte. It does not present sticky touch or at high temperatures. Do not apply on wood without pores (tropical, varnished ...), or on wood in contact with permanent water. Micronized pigments of long duration. Highlight the original grain. Matt and satin finish according to the number of layers. Colorless and COLOR CHART. VOC 30 g / l-2010 100g / l. It can also be used as a background to color and finish with all types of water or solvent based varnishes, such as those described below.
