-
Ref. 16031 Masilla de renovació polivalent en pols, d'interior, per a aplicació manual. Permet reomplir, renovar i allisar. FITXA TÈCNICA -
Ref.04016 Vinyl plastic paint. Especially suitable for interior decoration. Great softness to the touch, excellent leveling power (no cuts are noticeable), resistance to wet rubbing (easy cleaning) and brightness of its white and soft colors. Matte and smooth finish, no splashes. Good results at a very competitive price. Available in the same white and pastel base format. Easily repaintable with minimal VOC content.
SECURITY SHEET / TECHNICAL SHEET -
Ref. Sanitizing matte plastic paint for exterior and interior use. Thanks to the new silver ion technology, it is resistant to bacteria and fungi, protecting and cleaning the applied surfaces. Almost odorless and with highly decorative features, such as resistance to wet rubbing, covering and performance. Excellent results. Suitable for any construction support but thanks to its sanitizing nature, it is especially suitable for hospitals, residences, schools, hotels and homes in general. VOC <1 g / L - 2010 30 g / L.
SECURITY SHEET -
Ref. 03063 Water-based polyurethane varnish for concrete, printed concrete, stone and wood. Sparkly. Flexible. Resistance to sunlight. Renovation of veneers, slate, natural and artificial stone, masonry .... Protection of dirt on elastomers such as ARTIGUM GEL FIX, does not present sticky touch or at high temperatures. On plastic paints to reinforce alkali resistance, moderate abrasion and pedestrian traffic. Highlight the appearance of the surfaces. Easy horizontal and vertical application. VOC 24g / l - 2010 130 g / l. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
-
Ref. 13035 Two-component glossy aliphatic polyurethane varnish. Exterior Interior. Excellent tenacity High chemical resistance, mechanical resistance and sunlight. Special for concrete floors, protection of absorbent marble, polyester resins (boats), wood in extreme environments. To protect ARTIMIX-20 MICROCEMENTO in workplaces and pavements. When high mechanical and chemical resistance is required. Available in satin and matt finish. On porous supports seal with a first coat of gloss. VOC 398g / l - 2,010 400 g / l. UNE-ENV 12633: 2003 Slip resistance. The following products, unlike the previous ones, can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET / SAFETY DATA SHEET (catalyst)
-
Ref. 13035 Water-based one-component varnish for the protection of floors and decoration of the ARTIMIX 20 micro cement or similar porous supports (stone, mortar, printed concrete, brick, wood ...). Indoor and outdoor use. Shiny finish. Excellent wetting and consolidation of the support, blocking possible efflorescence. It can be applied as the first coat of the BARTIDUR A2C to minimize the usual increase of tone of the varnishes to the solvent. Easy horizontal and vertical application. Resistance to moderate abrasion and pedestrian traffic. COV 50- 2010 140g / l. Can create film and caution must be taken with wet supports or high salt content, since it can encapsulate them and being translucent finish they could be seen. On the other hand they protect, waterproof and reinforce the renewed aspect.
DATA SHEET / SAFETY DATA SHEET -
Ref. 06164 Polyurethane fixative for disintegrated supports. Great hardness and tenacity. Recommended for dry, wet or dusty concretes. Consolidates and protects concrete pavements. Sealing layer in porous floors before applying the ARTIDUR-X 100 or ARTIDUR A2C finishing polyurethanes. Outdoors or exposure to sunlight do not use as a visible layer, yellow. It can be seen in places protected from sunlight, increasing the tone of the concrete. Apply in well-ventilated places. Restoration of exterior wood very aged, saturate before painting. VOC 550g / l - 2010 750g / l.
-
Ref. 08063 Capa segelladora sobre superfícies poroses, absorbents o irregulars. S’aplica com a preparació del PROCÉS ARTIPUR, tant en acabats en color com transparent. Evita micro fissures o petits esquarteraments homogeneïtzant l’absorció entre les juntes en els enrajolats, facilitant la formació de la pel·lícula elàstica amb els elastòmers ARTIPUR. En qualsevol suport i circumstància, per assegurar un bon ancoratge, es recomanable afegir un 1% d’ADITOR PU promotor d’adherència . COV 28g/l - 2010 30g/l
FITXA TÈCNICA / FULLA SEGURETAT -
Ref. 08063 Sealing layer on porous, absorbent or irregular surfaces. It is applied as preparation of the ARTIPUR PROCESS, both in color and transparent finishes. Avoid micro-cracks or small squabbles. it homogenises the absorption between the joints in the tiles and facilitates the formation of the elastic film with the ARTIPUR elastomers. In any support and circumstance, to ensure a good anchoring, it is advisable to add a 1% Aditor PU adhesion promoter. VOC 28g / l - 2010 30g / l
-
Ref. 13031 Deep penetration fixator. Nanoparticles that act from the bottom of the porous materials until their surface consolidating action. Very breathable Substitutes acrylic copolymers in solvent. Dilution according to the state of disintegration of the support 1 p + 2-3 p water. Surfaces of aged paintings, plaster, cement, lime, brick, stone ... VOC 11g / l - 2010 30g / l
-
Ref. 01031 Acrylic fixative of great penetration. Hard and resistant. Seals old plastic paint, lime, tempera and degraded monolayers with microcracks. Slight increase in support tone Increase the performance of the finishes with plastic paints. Uniform absorptions and avoid color differences in the finishing layers. It comes in a very pure state. Dilution 1 p + 3-4 p. water by weight (according to absorption). Avoid the use application to avoid excess film. VOC 2g / l - 2010 30g / l.
-
Ref. 06131 High penetration consolidating impregnation for all types of construction materials. Absorption sealer on dusty backgrounds. Homogenizer product of the supports, avoids differences of joints and color of the finishes. Excellent fixer of deteriorated monolayers, broken cement, cement or lime mortar or stucco, exposed brick, concrete. It can soften old acrylic paints badly adhered and fix those that are in good condition. Breathable Treat the bottom without saturating. It slightly increases the tone of the support. Ideal to finish with PLIOART, with which you can mix to create glazes or intermediate layers. VOC 742g / l - 2,010 750g / l.
973 450 717|info@articsa.net
Ens plau informar-los que Artic disposa de noves certificacions en productes:
SUBSCRIU-TE I REP TOTES LES NOTÍCIES I NOVETATS
ON ESTEM