As these are thicker layer products, depending on the substrate it is advisable to prime with fasteners (see 02 Preparations and 03 Impregnation and consolidants). They also accept intermediate layers with silicon plastic paint SILART for the little retraction or NEW TEC PLIOART for its high perspiration, among others.

  • Ref. Sanitizing matte plastic paint for exterior and interior use. Thanks to the new silver ion technology, it is resistant to bacteria and fungi, protecting and cleaning the applied surfaces. Almost odorless and with highly decorative features, such as resistance to wet rubbing, covering and performance. Excellent results. Suitable for any construction support but thanks to its sanitizing nature, it is especially suitable for hospitals, residences, schools, hotels and homes in general. VOC <1 g / L - 2010 30 g / L.
    SECURITY SHEET
  • Ref. 07036 Smooth elastic waterproofing coating similar to ARTIGUM LISO, also with binder based on acrylic resins, but mixed with siloxanicas that give it a water-resistant and non-stick nature of the dirt, keeping the supports dry and clean. Very indicated in urban climates for its resistance to dirt. White and colors. COC 3g / l - 2010 140g / l. Certificate of anti-carbonation according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005 ARTIC pinturas DATA SHEET / SAFETY DATA SHEET
  • Ref. 04041 Matte siliconized plastic paint. Multipurpose. Its minimal shrinkage during drying makes it ideal for working on difficult surfaces, alkaline supports, lime, cement, old paint, temper ... without tearing them off. Compatible with plaster casts and plasterboard. On highly degraded surfaces, prime with NEW TEC FIXO or FIXOART. It can be used as first coat of thicker coatings. Vertical waterproofing and good breathability. For interior decorations and for the rehabilitation of facades and light patios. Washable, resistant to wet rub. No splashes, easy application, very good coverage and high performance. White and colors. Also available in SILART EXTRA BLANCO 04042. VOC 22g / l - 2010 40g / l UNE 48243 Certification: 2007. Plastic paint in aqueous dispersion, matt, in preservation and stability in the container, specular brightness, alkali and wet rub resistance, recoatability, hiding power. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET / CERTIFICATIONS

  • Ref. 07062 Flexible acrylic mortar to siloxane. Especially indicated for the waterproofing and decoration of facades. The projected application or trowel allows different textured finishes. The siloxane content gives it a waterproof and non-stick character. Easily covers microfusures. Ideal to regularize supports. Excellent resistance to weathering and good adhesion to concrete, mortar, fiber cement, etc... Breathable to water vapor and impermeable to rainwater. White and colors. COV 4g/l – 2010 140g/l. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET

  • Ref. 07034 Smooth elastic waterproof coating. With acrylic binder It contains hollow mineral particles and natural fibers, which reinforce its lightness. Waterproofing, decoration and insulation of facades and interiors. Its layer thickness and its elasticity allow to absorb microcracks up to 1 mm. It can be assembled with reticulated mesh. Uniformity of finishing, corrects deficiencies of the support. Anticarbonatation. Breathable No possibility of cracking when aging. High resistance to alkalinity, sunlight, high condensation and extreme climates. Mate. White and colors. VOC 3g / l - 2010 140g / l. Anti-carbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005. ARTIC pinturas DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation) / CERTIFICATION (CE Marking)
  • Ref. 07321 Transparent and waterproof elastomeric coating. Indicated for the repair, protection and waterproofing of facades and roofs with glazed finishes, tiles and tiles, as well as stones and slate, where a transparent finish is necessary. Sealing of sanitary ceramics eliminating joints and protecting from detachment. On ceramic supports, clean and tone with STONEART. It can be reinforced by arming with the fiberglass ARTIMAT FIX mesh that is completely absorbed, transparent and that unifies splices and overlaps. To prevent adhesion of the external dirt, varnish with BARTICRIL PUR. It can also be repainted with a variety of opaque finishes. It is also an excellent consolidant and protector of concrete. 03063. VOC 7g / l - 2010 140g / l. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET

  • Ref. 07033 Waterproof coating with textured elastic acrylic binder. Multifunctional Anticarbonatation. Breathable Absorbs cracks up to 2 mm. It can be assembled with reticulated mesh. Great filling power and homogenization of very irregular surfaces. Thicknesses of 1 - 1.5 mm are achieved. Different rough finishes, chopped, gotelé, ... Composed with hollow mineral particles, with air at very low pressure, has a very low thermal and acoustic transmission power and a great power of isolation. It keeps the supports hot and dry giving comfort in the interiors. Is light. Convenient application. White and colors. VOC 4g / l - 2010 40g / l. Anti-carbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation) / CERTIFICATION (CE Marking)

  • Ref. 04024 Paint / coating similar to the ARTICRIL MILENNIUM, but with siloxane binders that give it a water-resistant and non-stick nature, keeping the supports dry and clean. Very matt finish. Especially indicated in the rehabilitation of facades in urban climates for its resistance to dirt. Very hard and easy to clean. Vertical waterproofing and protector of rain and humidity. Good breathability Long durability Protection of concrete, improves resistance to carbonation. Resistance to mold. High performance and high covering power. White and colors. VOC 22g / l - 2010 40g / l. UNE 48244 certification: 2007. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET

  • Ref. 04023 Satin plastic paint based on acrylic copolymers. Very noble to look with highly silky finish For interior and exterior decorations. Washable, resistant to wet rubbing, exceeding 8,000 double passes. Softness of an enamel, health benefits. Excellent for applications in medical centers, pharmacists, hospitals, schools ..., where low toxicity is required. Minimum maintenance Exteriors and facades in aggressive, industrial, marine, contaminated or humid environments. Anti-carbonation protection of concrete. Raincoat. Additivated with ADITOR PU (08 Complementos) is resistant to standing water. Resistant to mold. Easy application, high performance. Flexible. Excellent cover. White and colors. VOC 20g / l - 2010 100g / l Anticarbonation certificate according to UNE-EN 13295: 2005 and CE marking according to UNE-EN 1504-2: 2005. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET / CERTIFICATION (Anti-Carbonation) / CERTIFICATION (CE Marking)

  • Ref. 04022 Painting / coating based on acrylic copolymers with a very matt finish. Especially suitable for interior and exterior quality work, with high performance and minimal maintenance. Very hard and easy to clean. Ideal in the rehabilitation of facades. Vertical waterproofing and protector of rain and humidity. Good breathability Long durability Protection of concrete, improves resistance to carbonation. Resistant to mold. High performance and high covering power. Elegant and sober finish. It does not splash. White, black and colors. VOC 22g / l - 2010 40g / l Certification UNE 48244: 2007. Aqueous emulsion coating for exteriors, in water and water vapor permeability, adhesion, accelerated aging, hiding power, fineness, alkali resistance, mold and algae. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET / CERTIFICATIONS

  • Ref. 07032 Acrylic coating. Smooth and stony finish. Ideal in public works with concrete formwork, on highways, ports, retaining walls, ships ... Vertical raincoat with good breathability. To fill the irregularities and coke of the supports. Resistant to mold. White and colors. VOC 5g / l - 2010 140g / l. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET

  • Ref. 07031 Rough acrylic coating. With microlaminar extenders, which give it a high resistance to aging compared with other acrylics on the market. Aesthetic finish on exteriors and facades. Great filling power and homogenization of very irregular surfaces. Thicknesses of 1 - 1.5 mm are achieved. Vertical raincoat with good breathability. Different smooth finishes, rough, chopped, monolayer ... Resistant to mold. The good drying behavior allows an easy application. Work on consolidated and stable surfaces. White and colors VOC 4g / l - 2010 140g / l. ARTIC pinturas

    DATA SHEET / SAFETY DATA SHEET

Title

Go to Top